Запросы
Продолжая просмотр сайта и(или) нажимая X, я соглашаюсь с использованием файлов cookie владельцем сайта в соответствии с Политикой в отношении файлов cookie в том числе на передачу данных, указанных в Политике, третьим лицам (статистическим службам сети Интернет), в соответствии с Пользовательским соглашением >X
Huawei OptiXstar T823E-x
An industrial Optical Network Unit (ONU) in Huawei's Industrial Optical Network Solution, OptiXstar T823E-X features two 10-Gigabit-Capable Symmetric Passive Optical Network (XGS-PON) ports on the network side, and eight GE ports, featuring Power over Ethernet Plus Plus (PoE++) support, on the user side. With high-performance forwarding capabilities, the device is an integral part of network solutions for a wide range of industrial scenarios, from transportation to public security.
Type B protection.
Dual uplink Type C protection.
Ring network detection.
Filtering based on MAC, IP, and URL.
DoS anti-attacks.
Session number restriction.
Device access control.
802.1X authentication modes: EAP-MD5, TLS, TTLS, and PEAP.
XML and Web UI.
Centralized management on eSight.
Rogue ONT detection and isolation.
PPPoE/DHCP simulation testing.
Serial port data collection and transmission.
Transparent transmission of serial port data.
| Parameters | Huawei OptiXstar T823E-X |
| Dimensions (H x W x D) | 43.6 x 250 x 180 mm (without mounting ears) 43.6 x 482.6 x 180 mm (with mounting ears) |
| Weight (Without Power Adapter) | Approximately 2.5 kg |
| Operating Temperature | –40°C to +70°C |
| Operating Humidity | 5–95% RH (non-condensing) |
| System Power Supply | 12–60 V DC |
| Rated Voltage and Current | 56 V DC, 4.5 A |
| Maximum PoE Power Consumption |
220 W (total power consumption) 60 W (each GE port power consumption) |
| Surge Protection | Ethernet port: common mode 6 kV; differential mode 1.5 kV DC power port: common mode 4 kV; differential mode 2 kV |
| Maximum Power Consumption |
Approximately 240 W |
| NNI | 1 x XGS-PON SFP+ and 1 x XGS-PON BOB |
| UNI | 8 x GE (PoE++) + 2 x RS485/RS232 + 1 x DI + 1 x DO |
| Installation Mode | Cabinet or network box |
| Protection Level | IP40 |
| Authentication | 802.1X |
| PON Port | Port type: SC/UPC Complies with ITU-T G.9807.1, Class N1/N2 Transmission rate: RX 9.953 Gbit/s, TX 9.953 Gbit/s Maximum transmission distance: 20 km Optical receiver sensitivity: –28 dBm Overload optical power: –8 dBm |
| Ethernet Electrical Port | Port type: RJ-45 PoE++, complies with IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Auto port speeds (10/100/1000 Mbit/s) |
| RS485 Port | Port type: RJ-45 Complies with TIA/EIA-485, ITU-T V.24, ITU-T V.28 |
| RS232 Port | Port type: RJ-45 Complies with TIA/EIA-232, ITU-T V.24, ITU-T V.28 |
| DI/DO Port | The DI is connected to devices such as the door status sensor, infrared sensor or other devices. The DO is connected to the external alarm device or other devices. DI port type: 4-pin Phoenix terminal DO port type: 3-pin Phoenix terminal |
Дополнительная маркетинговая информация для партнёров.
Вход в партнёрскую зону для управления заказами, доступа
к технической поддержке и других возможностей.
