Εάν χρειάζεστε βοήθεια, πατήστε εδω:
The OptiXaccess EA5801S-GP16 is a compact outdoor blade Optical Line Terminal (OLT). It provides 16 Gigabit Passive Optical Network (GPON) ports to support Fiber To The Home (FTTH) coverage in remote areas, evolution from cable networks to FTTH networks, outdoor video backhaul, Fiber To The Office (FTTO), and Fiber To The Machine (FTTM).
Provides 16 GPON service ports and works with the GPON optical module to enable GPON access.
The End to End (E2E) pre-connection makes devices plug-and-play and eliminates the need for fiber splicing.
The device weighs no more than 15 kg and has a volume of only 12 L, with simple installation that only requires a single person.
|Parameters||Huawei OptiXaccess EA5801S-GP16|
|Dimensions (H x W x D)||400 x 300 x 120 mm
|Power Supply Mode||DC power supply
AC power supply
|Rated Voltage||DC power supply: –48 V to –60 V
AC power supply: 100–240 V
|Maximum Input Current||DC power supply: 4 A
AC power supply: 1.5 A
|Surge Protection Level||AC power port: 20 kA in difference and common modes
DC power port: 10 kA in differential mode and 20 kA in common mode
|Operating Temperature||–40°C to +50°C (with solar radiation); minimum startup temperature: –25°C|
|Operating Humidity||5–95% RH
|Atmospheric Pressure||70–106 kPa|
|Altitude||Below 4000 m
The air density varies with altitude, which affects the heat dissipation capability of devices, so the operating temperature of the device changes with the altitude.
|System Switching Capacity||140 Gbit/s|
|IPv4 Routing Table||8192|
|IPv6 Routing Table||4096|
|10GE/GE Upstream Ports||4|
|Service Ports||16 GPON|
|Power Consumption||• Static Power Consumption:
DC power supply: 50 W
AC power supply: 51 W
• Typical Power Consumption:
DC power supply: 85 W
AC power supply: 88 W
• Maximum Power Consumption:
DC power supply: 90 W
AC power supply: 94 W
The power consumption of the device is calculated based on the following conditions:
Static power consumption: 25°C, no optical module in any optical port, and no services running.
Typical power consumption: 25°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic.
Maximum power consumption: 50°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic.