If you need help, please click here:
Huawei AP2050DN-E is a wall plate Access Point (AP) that complies with 802.11ac Wave 2. It supports 2 x 2 MIMO and two spatial streams that deliver a rate of 1.267 Gbit/s. The AP2050DN-E is used mainly in environments with densely located small rooms, such as hotel guest rooms, student dormitories, hospital wards, and small offices. The AP's built-in Bluetooth module works with eSight to locate Bluetooth devices.
Wide Variety of Interfaces
One GE uplink port, four GE downlink ports, and two RJ45 pass-through phone ports (compatible with RJ11). Built-in Bluetooth works with eSight to locate Bluetooth devices and PoE OUT supplies power for STAs such as IP phones.
Easy to install: Ceiling-mounted, wall-mounted, plate-mounted, and desk-mounted methods.
Simple Cloud Management
Simple management and O&M for APs and services on Huawei’s cloud management platform save network O&M costs.
|Dimensions (H x W x D)||36 mm x 140 mm x 86 mm|
|Power Input||48V DC ±5%
PoE power supply: Complies with IEEE 802.3af/at
|Maximum Power Consumption||11.5W
Note: Maximum power consumption depends on local laws and regulations
|Operating Temperature||0°C to 40°C|
|Antenna Type||Built-in omnidirectional antenna|
|Maximum Number of Users||≤ 256|
|Maximum Transmit Power||2.4G: 21 dBm (combined power)
5G: 20 dBm (combined power)
Notes: Transmit power depends on local laws and regulations. The AP2050DN-E is used only in countries and regions that support 86-type boxes
|MIMO: Spatial Streams||2 x 2:2|
|Radio Protocols||802.11a/b/g/n/ac/ac Wave 2|
|Maximum Rate||1.267 Gbit/s|
1. This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.