Pokud potřebujete pomoc, prosím klikněte zde:

Huawei OptiXstar P670E

Huawei OptiXstar P670E — a panel-type Optical Network Unit (ONU) that can be easily installed in 86-type electrical boxes on enterprise campuses — features one GPON port on the network side, with GE and POTS ports on the user side.

OptiXstar P670E is available in two models. While P670E is powered by an Alternating Current (AC) supply, P670E-H uses a photoelectric composite cable, comprised of fibers for high-bandwidth connections, and copper wires for power supply to remote optical devices.



Parameters Huawei OptiXstar P670E
Dimensions Panel: 86 x 86 x 9.5 mm
Internal module depth: 35 mm
Weight Approximately 150 g
Operating Temperature –5°C to +40°C
Operating Humidity 5–95% RH (non-condensing)
AC Input 100–240 V AC, 50/60 Hz
POF Power Input 48–56 V DC
The copper wires in a photoelectric composite cable transmit power in PoE mode and do not transmit data.
IP Rating IP20
Surge Protection GE: common mode 2.5 kV
POTS:common mode 2.5 kV
AC power: common mode 6 kV; differential mode 4 kV
Maximum Power
P670E: 5.8 W
P670E-H: 6.5 W
UNI 1 x GE, 1 x POTS
Installation Mode Indoor 86-box installation
GPON Port • Port type: SC/UPC
• Complying with ITU-T G.984.2, Class B+
• Receiver sensitivity: –27 dBm to –29 dBm
• Overload optical power: –8dBm
• Transmission rate: upstream 1.244 Gbit/s, downstream 2.488 Gbit/s
• Type B single-homing
• Type B dual-homing (supported in Layer 2 forwarding)
Ethernet Electrical Port • Port type: RJ-45
• Auto port speeds (10/100/1000 Mbit/s)
• Configuration of the number of MAC addresses learned
• VLAN transparent transmission/VLAN filtering
POTS Port • Maximum REN: 4
• G.711A/μ, G.729a/b, and G.722 encoding/decoding
• T.30/T.38/G.711 fax mode
• Emergency calls (with the SIP protocol)

Pro partnery

Pokud jste již partnerem, klikněte sem a získáte další marketingové zdroje.
Klikněte sem a navštivte zónu pro partnery a zkontrolujte stav dotazu, spravujte objednávku, získejte podporu nebo zjistěte víc o Huawei Partners.