Este site utiliza cookies. Ao continuar navegando no site, você concorda com esse uso. Leia nossa política de privacidade>
Se precisar de ajuda, clique aqui:
Huawei OptiXstar T823E-x
An industrial Optical Network Unit (ONU) in Huawei's Industrial Optical Network Solution, OptiXstar T823E-X features two 10-Gigabit-Capable Symmetric Passive Optical Network (XGS-PON) ports on the network side, and eight GE ports, featuring Power over Ethernet Plus Plus (PoE++) support, on the user side. With high-performance forwarding capabilities, the device is an integral part of network solutions for a wide range of industrial scenarios, from transportation to public security.
Type B protection.
Dual uplink Type C protection.
Ring network detection.
Filtering based on MAC, IP, and URL.
Session number restriction.
Device access control.
802.1X authentication modes: EAP-MD5, TLS, TTLS, and PEAP.
XML and Web UI.
Centralized management on eSight.
Rogue ONT detection and isolation.
PPPoE/DHCP simulation testing.
Serial port data collection and transmission.
Transparent transmission of serial port data.
|Parameters||Huawei OptiXstar T823E-X|
|Dimensions (H x W x D)||43.6 x 250 x 180 mm (without mounting ears)
43.6 x 482.6 x 180 mm (with mounting ears)
|Weight (Without Power Adapter)||Approximately 2.5 kg|
|Operating Temperature||–40°C to +70°C|
|Operating Humidity||5–95% RH (non-condensing)|
|System Power Supply||12–60 V DC|
|Rated Voltage and Current||56 V DC, 4.5 A|
|Maximum PoE Power
|220 W (total power consumption)
60 W (each GE port power consumption)
|Surge Protection||Ethernet port: common mode 6 kV; differential mode 1.5 kV
DC power port: common mode 4 kV; differential mode 2 kV
|Approximately 240 W|
|NNI||1 x XGS-PON SFP+ and 1 x XGS-PON BOB|
|UNI||8 x GE (PoE++) + 2 x RS485/RS232 + 1 x DI + 1 x DO|
|Installation Mode||Cabinet or network box|
|PON Port||Port type: SC/UPC
Complies with ITU-T G.9807.1, Class N1/N2
Transmission rate: RX 9.953 Gbit/s, TX 9.953 Gbit/s
Maximum transmission distance: 20 km
Optical receiver sensitivity: –28 dBm
Overload optical power: –8 dBm
|Ethernet Electrical Port||Port type: RJ-45
PoE++, complies with IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Auto port speeds (10/100/1000 Mbit/s)
|RS485 Port||Port type: RJ-45
Complies with TIA/EIA-485, ITU-T V.24, ITU-T V.28
|RS232 Port||Port type: RJ-45
Complies with TIA/EIA-232, ITU-T V.24, ITU-T V.28
|DI/DO Port||The DI is connected to devices such as the door status sensor, infrared sensor or other devices.
The DO is connected to the external alarm device or other devices.
DI port type: 4-pin Phoenix terminal
DO port type: 3-pin Phoenix terminal