This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

If you need help, please click here:

Точки доступу AP7052DN та AP7152DN

Huawei’s AP7052DN and AP7152DN are the latest-generation 802.11ac Wave 2 Access Points (APs). They support 4 x 4 MIMO, four spatial streams, and 2.4G-to-5G switchover. In dual-5G mode, the device rate can reach up to 3.46 Gbit/s. The APs allow IoT application expansion through IoT modules and are applicable to enterprise office and education scenarios.

Huawei

Specifications¹

Specifications AP7052DN & AP7152DN
Dimensions (H x W x D) 52 mm x 220 mm x 220 mm
Power Input DC: 42.5V to 57V
PoE power supply: In compliance with IEEE 802.3at/bt; dual PoE power supply
Maximum Power Consumption DC/802.3bt power supply: 33W (excluding the output power of the USB port)
802.3at power supply: 25.5W (the USB function and the 5 Gbit/s mode of network ports are unavailable. The IoT card power is lower than 0.5 W.)

Note: The actual maximum power consumption depends on local laws and regulations
Operating Temperature –10°C to 50°C
Antenna Type AP7052DN: Built-in dual-band omnidirectional antennas
AP7152DN: External dual-band omnidirectional antennas
Maximum Number of Concurrent Users ≤ 512
Maximum Transmit Power 2.4G/5G (switchable): 26 dBm/21 dBm (combined power)
5G (non-switchable): 24 dBm (combined power)

Note: The actual transmit power depends on local laws and regulations
MIMO: Spatial Streams 4 x 4:4
Radio Protocols 802.11a/b/g/n/ac/ac Wave 2
Maximum Rate 3.46 Gbit/s

1. This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.

Партнерам

Якщо ви вже є партнером компанії, натисніть тут, щоб отримати більше маркетингових ресурсів.
Натисніть тут, щоби перейти на сторінку партнерських організацій для перевірки стану запиту, управління замовленнями, отримання підтримки або додаткової інформації про партнерів компанії Huawei.

Share link to: