Enquiries
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
CloudEngine 8800
A series of high port density switches, CloudEngine 8800 brings a combination of both high performance and low latency to cloud-oriented data center networks and high-end campus networks alike. Additionally, the series supports an extensive range of data center features, Software-Defined Networking (SDN) capabilities, and high performance stacking technologies.
With 10 GE, 25 GE, 40 GE, 100 GE, 200 GE, and 400 GE ports, as well as flexible plug-in cards, CloudEngine 8800 is well suited for both the core and aggregation layers. The series is also compatible with CloudEngine 16800, 12800, 6800, and 5800 series switches, helping enterprises build networks that are scalable, simplified, open — and secure.
Flexible, high density access, with aggregation capabilities and up to 32 x 100 GE, 64 x 40 GE, 128 x 25 GE, or 128 x 10 GE ports in a 2U chassis.
Virtual Extensible Local Area Network (VXLAN) turns CloudEngine 8800 into a high-performance hardware gateway on a virtualized overlay network, supporting up to 16 million tenants.
Significantly simplify operations with intelligent Operations and Maintenance (O&M), proactive reporting of Google Remote Procedure Call (gRPC) high-speed data, proactive detection of network-wide paths, and real-time monitoring of network health status.
Huawei Helps CyberAgent Build IDN Cloud DC
Huawei CloudFabric Solution empowers Japan’s CyberAgent to build an IDN-capable cloud data center network with all fixed switches.
Diputación de Alicante’s Agile Network
Huawei helps the Alicante government build an efficient, unified campus office network and data center network.
| Parameters | CloudEngine 8850-64CQ-EI |
| Ports | 64 x 100 GE QSFP28 |
| Switching Capacity | 12.8 Tbit/s |
| Forwarding Performance | 4482 mpps |
| Buffer | 42 MB |
| Reliability | LACP Hardware-based BFD |
| O&M | Telemetry Netstream sFlow Enhanced ERSPAN |
| Data Center Features | VXLAN routing and bridging BGP EVPN M-LAG DCBX PFC ETS |
| Maximum Power Consumption | 965 W |
| Power Supply | AC: 1200 W AC + 240 V DC HVDC: 1200 W DC: 1200 W |
| Operating Voltage | AC: 90–290 V HVDC: 240 V (188–290 V) 380 V (188–400 V) DC: –38.4 V to –72 V |
1. This content is applicable only to regions outside the Chinese Mainland. Huawei reserves the right to interpret this content.
| Parameters | CloudEngine 8850-HAM |
| Downlink Ports | 32 x 40/100 GE QSFP28 or 32 x 200 GE QSFP56 |
| Uplink Ports | 8 x 400 GE QSFP-DD |
| Switching Capacity | 19.2 Tbit/s |
| Forwarding Performance | 4350 mpps |
| Buffer | 64 MB |
| Reliability | LACP Hardware-based BFD |
| O&M | Telemetry Netstream ERSPAN+ AnyFlow Intelligent Traffic Analysis Packet Event |
| Data Center Features | 32k multicast entries, MoFRR VXLAN routing and bridging BGP EVPN M-LAG 3.0 |
| Maximum Power Consumption | 32 x 200 GE + 8 x 400 GE: 1152 W 32 x 100 GE + 8 x 400 GE: 973 W |
| Power Supply | AC: 1200 W |
| Operating Voltage | AC: 90–290 V |
1. This content is applicable only to regions outside the Chinese Mainland. Huawei reserves the right to interpret this content.
| Parameters | CloudEngine 8851-32CQ8DQ-P |
| Downlink Ports2 | 32 x 40/100 GE QSFP28 or 32 x 200 GE QSFP56 |
| Uplink Ports2 | 8 x 400 GE QSFP-DD |
| Switching Capacity | 19.2 Tbit/s |
| Forwarding Performance | 4350 mpps |
| Buffer | 64 MB |
| Reliability | LACP Hardware-based BFD |
| O&M | Telemetry Netstream ERSPAN+ AnyFlow Intelligent Traffic Analysis Packet Event |
| Data Center Features | VXLAN routing and bridging BGP EVPN M-LAG |
| Intelligent and Lossless Network | AI ECN PFC Deadlock Prevention ECN Overlay iQCN |
| Maximum Power Consumption | 32 x 200 GE + 8 x 400 GE: 1152 W 32 x 100 GE + 8 x 400 GE: 973 W |
| Power Supply | AC: 1200 W |
| Operating Voltage | AC: 90–290 V |
1. This content is applicable only to regions outside the Chinese Mainland. Huawei reserves the right to interpret this content.
2. By default, the CE8851-32CQ8DQ-P supports 32 x 100 GE ports. To upgrade, purchase the CE88-RTU-U32CQ hardware Right to Use (RTU) for 32 x 200 GE ports, or purchase the CE88-RTU-8DQ hardware RTU for 8 x 400 GE QSFPDD ports.
If you are already a Partner, please click here to get more marketing resources.
Click here to visit the Partner zone to check enquiry status, manage orders, get support, or learn more about Huawei Partners.
