Huawei OptiXaccess EA5801E-GP08
A compact box-shaped OLT.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Produits, solutions et services pour les entreprises
Lightweight and Small
High Reliability
Easy Installation and Flexible Deployment
Specifications
Parameters | Huawei OptiXaccess EA5801E-GP08 |
Dimensions (H x W x D) | Excluding mounting ears: 43.6 x 442 x 220 mm Including IEC Mounting Ears: 43.6 x 482.6 x 220 mm Including ETSI mounting ears: 43.6 x 535 x 220 mm |
Maximum Fully-loaded Weight (DC) | 5 kg |
Power Supply Mode | DC power supply (dual backup) AC power supply (dual backup) |
Working Voltage Range | DC power supply: –38.4 V to –72 V AC power supply: 100–240 V |
Rated Voltage | DC power supply: –48 V/–60 V AC power supply: 110 V/220 V |
Maximum Input Current | DC power supply: 6 A AC power supply: 2.5 A |
Ambient Temperature | –40°C to +65°C The device can start up at a lowest temperature of –25°C. Note: The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack. |
Ambient Humidity | 5%–95% RH |
Atmospheric Pressure | 70–106 kPa |
Altitude | Below 4000 m Note: The air density varies with the altitude and will affect the heat dissipation of a device, so the working environment temperature of the device varies with the altitude. |
System Switching Capacity | Below 4000 m Note: The air density varies with the altitude, which affects the heat dissipation capability of devices, so the operating temperature of the device changes with the altitude. |
MAC Addresses | 32768 |
Access ONT | 256 |
IPv4 Routing Table | 8192 |
IPv6 Routing Table | 4096 |
ARP Table | 16384 |
Bit Error Rate (BER) in Full Load | A BER smaller than 10 e-10 for a port that transmits data in full load |
10 GE/GE upstream ports | 4 |
Service ports | 8 GPON |
Power Consumption | Static Power Consumption: DC power supply: 50 W AC power supply: 51 W Typical Power Consumption: DC power supply: 85 W AC power supply: 88 W Maximum Power Consumption: DC power supply: 90 W AC power supply: 94 W Note: The power consumption of the device is calculated based on the following conditions: Static power consumption: 25°C, no optical module in any optical port, and no service running. Typical power consumption: 25°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic. Maximum power consumption: 50°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic. |