This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>


To have a better experience, please upgrade your IE browser.


If you need help, please click here:

Huawei OptiXaccess EA5801E-GP08

The OptiXaccess EA5801E-GP08 Optical Line Terminal (OLT) provides Gigabyte Passive Optical Networks (GPON) access, and supports Fiber To The Home (FTTH), Fiber To The Office (FTTO), and Fiber To The Machine (FTTM) solutions. It carries all services over one fiber network, simplifying network architecture and reducing Operating Expenditure (OPEX).



Parameters Huawei OptiXaccess EA5801E-GP08
Dimensions (H x W x D) Excluding mounting ears: 43.6 x 442 x 220 mm
Including IEC Mounting Ears: 43.6 x 482.6 x 220 mm
Including ETSI mounting ears: 43.6 x 535 x 220 mm
Maximum Fully-loaded Weight (DC) 5 kg
Power Supply Mode DC power supply (dual backup)
AC power supply (dual backup)
Working Voltage Range DC power supply: –38.4 V to –72 V
AC power supply: 100–240 V
Rated Voltage DC power supply: –48 V/–60 V
AC power supply: 110 V/220 V
Maximum Input Current DC power supply: 6 A
AC power supply: 2.5 A
Ambient Temperature –40°C to +65°C
The device can start up at a lowest temperature of –25°C.

The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack.
Ambient Humidity 5%–95% RH
Atmospheric Pressure 70–106 kPa
Altitude Below 4000 m

The air density varies with the altitude and will affect the heat dissipation of a device, so the working environment temperature of the device varies with the altitude.
System Switching Capacity
Below 4000 m

The air density varies with the altitude, which affects the heat dissipation capability of devices, so the operating temperature of the device changes with the altitude.
MAC Addresses 32768
Access ONT 256
IPv4 Routing Table 8192
IPv6 Routing Table 4096
ARP Table 16384
Bit Error Rate (BER) in Full Load A BER smaller than 10 e-10 for a port that transmits data in full load
10 GE/GE upstream ports 4
Service ports 8 GPON
Power Consumption Static Power Consumption:
DC power supply: 50 W
AC power supply: 51 W
Typical Power Consumption:
DC power supply: 85 W
AC power supply: 88 W
Maximum Power Consumption:
DC power supply: 90 W
AC power supply: 94 W

The power consumption of the device is calculated based on the following conditions:
Static power consumption: 25°C, no optical module in any optical port, and no service running.
Typical power consumption: 25°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic.
Maximum power consumption: 50°C, 4 x 10 GE upstream transmission, 16 x GPON ports, full service configuration, and full traffic.


Якщо ви вже є партнером компанії, натисніть тут, щоб отримати більше маркетингових ресурсів.
Натисніть тут, щоби перейти на сторінку партнерських організацій для перевірки стану запиту, управління замовленнями, отримання підтримки або додаткової інформації про партнерів компанії Huawei.