Se hai bisogno di aiuto, fai clic qui:
Featuring a highly integrated power supply and network backhauling, Huawei PowerCube500-T873E is a video site solution that is widely used in Smart City and smart transportation scenarios. The solution uses high-performance power modules and an intelligent Operation Support System (OSS) to provide uninterrupted power supply, significantly improving system reliability and operational efficiency.
12 V DC, 24 V AC output.
Compact, light, and one-stop pole-mounted installation.
IP55 protection rating.
Working temperature: –40ºC to 55ºC.
Unified network management, remote fault analysis and locating, analysis of poor video quality, and remote video diagnosis all improve the online rate for video footage.
Intelligent self-switching of mains, batteries, and solar power supports remote intelligent monitoring, slashing the need for manpower and eliminating any need for real-time monitoring.
|Parameters||System Parameter Type|
|Dimensions (H x W x D)||570 x 300 × 150 mm
|Weight||< 18 kg|
|Heat Dissipation Mode||Natural heat dissipation|
|Installation Mode||Pole-mounted installation or wall-mounted installation|
|Pole Diameter Range||105–210 mm
|Outgoing Mode||Down-line, back-line|
|Noise Level||≤ 65 dB (A) at 1.5 m, GR487 compliant
|Degree of Protection||IP55|
|Operating Ambient Temperature Range||
–40 ºC to +55 ºC
|Storage Temperature Range||–40 ºC to +70 ºC
|Operating Humidity Range||5–95% (non-condensing)
|Altitude||0–5000 m (the maximum operating temperature decreases by 1°C for each 200 m elevation from 2000 m to 5000 m)
|Salt Spray Prevention||Supports salt spray prevention in the environment where the distance is greater than 500 m
|Parameters||Power Parameter Type|
|Mains Input Mode||220 V AC single phase|
|Mains Input Voltage||85–290 V AC, Rated: 220 V AC|
|Input Frequency||45–66 Hz|
|Maximum Input Current||4A (450 W)|
|Solar Input Voltage||36–120 V DC|
|MPPT Tracing Precision||≥ 98%|
|Maximum Input Power of Solar Energy||1400 W|
|Output Voltage||2 x 12 V DC (total power ≤ 72 W) 2 x 24 V AC (total power ≤ 100 W) PoE/PoE+/PoE++ (48 V DC) (estimated total PoE output power ≤ 170 W)|
|Rated Output Power||200 W (12 V DC + 24 V AC + 6 x PoE total power ≤ 200 W)|
|Input Surge Protection||AC: 20/ kA / 20 kA (8 / 20 µs); 6/kV / 6kV (1.2 / 50µs)|
|Output Surge Protection||DC: 12 V power output: 2/4 kV (8/20 μs) 3/5kA (8/20μs) AC: 24 V power output: 2/6 kV (insulated)|
|Parameters||Network Parameter Type|
|1 x BOB + 1 x SFP
||1 x GPON/XGS-PON/2 x GPON
|Interface Type (GPON)||SC/UPC|
|Compliance Standards (GPON)||ITU-T G.984.2, Class B+|
|Receiver Sensitivity (GPON)||(GPON) –27 dBm to –29 dBm|
|Overload Optical Power (GPON)||–8dBm
|Transfer Rate (GPON)||Downstream rate: 2.488 Gbit/s; Upstream rate: 1.244 Gbit/s|
|Networking Protection (GPON)||(GPON) Type B single-homing and Type B dual-homing (supported in Layer 2 forwarding mode)
|Interface Type (XGS-PON)||SC/UPC|
|Compliance Standards (XGS-PON)||ITU-T G.9807, Class N1/N2
|Receiver Sensitivity (XGS-PON)||–28 dBm
|Overload Optical Power (XGS-PON)||–9 dBm
|Transfer Rate (XGS-PON)||Downlink Rate: 9.953 Gbit/s Uplink Rate: 9.953 Gbit/s
|Networking Protection (XGS-PON)||Type B single-homing and Type B dual-homing (supported in Layer 2 forwarding mode)|
|Type and Quantity||8 GE (2 x GE PoE++, 2 x GE, and 4 x GE PoE+) + 1 x DI + 1 x DO|
|PoE Compliance Standards||IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt|
|POE Power||The maximum output power is 170 W. GE ports 1 and 2 support a maximum of 60 W (supporting PoE++). GE ports 3 and 4 do not support PoE. GE ports 5 to 8 support a maximum of 30 W (supporting PoE+).
|Interface Rate||10/100/1000 Mbit/s auto-sensing|
|DI||Connect door magnet and infrared sensor (+, –)
|DO||Connect external alarm devices (+, –)|