Buscar
  • Huawei CE8800 data center switches

    CloudEngine 8800 Series Data Center Switches

    High performance, high port density, and SDN-ready.

Overview

  • Overview
  • Features
  • Specifications
  • Resources
  • Support
CloudEngine 8800

CloudEngine 8800 Series Data Center Switches

A series of high port density switches, CloudEngine 8800 brings a combination of both high performance and low latency to cloud-oriented data center networks and high-end campus networks alike. Additionally, the series supports an extensive range of data center features, Software-Defined Networking (SDN) capabilities, and high performance stacking technologies.

With 10 GE, 25 GE, 40 GE, 100 GE, 200 GE, and 400 GE ports, as well as flexible plug-in cards, CloudEngine 8800 is well suited for both the core and aggregation layers. The series is also compatible with CloudEngine 16800, 12800, 6800, and 5800 series switches, helping enterprises build networks that are scalable, simplified, open — and secure.

Most Diverse CPE Types

Scalability

Flexible, high density access, with aggregation capabilities and up to 32 x 100 GE, 64 x 40 GE, 128 x 25 GE, or 128 x 10 GE ports in a 2U chassis.

Virtual Access Network

Virtualization

Virtual Extensible Local Area Network (VXLAN) turns CloudEngine 8800 into a high-performance hardware gateway on a virtualized overlay network, supporting up to 16 million tenants.

Intelligent

Intelligence

Significantly simplify operations with intelligent Operations and Maintenance (O&M), proactive reporting of Google Remote Procedure Call (gRPC) high-speed data, proactive detection of network-wide paths, and real-time monitoring of network health status.

Specifications¹


Parameters CloudEngine 8850-64CQ-EI
Ports 64 x 100 GE QSFP28
Switching Capacity 12.8 Tbit/s
Forwarding Performance 4482 mpps
Buffer 42 MB
Reliability LACP
Hardware-based BFD
O&M Telemetry
Netstream
sFlow
Enhanced ERSPAN
Data Center Features VXLAN routing and bridging
BGP EVPN
M-LAG
DCBX
PFC
ETS
Maximum Power Consumption 965 W
Power Supply AC: 1200 W AC + 240 V DC
HVDC: 1200 W
DC: 1200 W
Operating Voltage AC: 90–290 V
HVDC:
240 V (188–290 V)
380 V (188–400 V)
DC: –38.4 V to –72 V

1. This content is applicable only to regions outside the Chinese Mainland. Huawei reserves the right to interpret this content.

Parameters CloudEngine 8850-HAM
Downlink Ports 32 x 40/100 GE QSFP28 or 32 x 200 GE QSFP56
Uplink Ports 8 x 400 GE QSFP-DD
Switching Capacity 19.2 Tbit/s
Forwarding Performance 4350 mpps
Buffer 64 MB
Reliability LACP
Hardware-based BFD
O&M Telemetry
Netstream
ERSPAN+
AnyFlow
Intelligent Traffic Analysis
Packet Event
Data Center Features 32k multicast entries, MoFRR
VXLAN routing and bridging
BGP EVPN
M-LAG 3.0
Maximum Power Consumption 32 x 200 GE + 8 x 400 GE: 1152 W
32 x 100 GE + 8 x 400 GE: 973 W
Power Supply AC: 1200 W
Operating Voltage AC: 90–290 V

1. This content is applicable only to regions outside the Chinese Mainland. Huawei reserves the right to interpret this content.

Parameters CloudEngine 8851-32CQ8DQ-P
Downlink Ports2 32 x 40/100 GE QSFP28 or 32 x 200 GE QSFP56
Uplink Ports2 8 x 400 GE QSFP-DD
Switching Capacity 19.2 Tbit/s
Forwarding Performance 4350 mpps
Buffer 64 MB
Reliability LACP
Hardware-based BFD
O&M Telemetry
Netstream
ERSPAN+
AnyFlow
Intelligent Traffic Analysis
Packet Event
Data Center Features VXLAN routing and bridging
BGP EVPN
M-LAG
Intelligent and Lossless Network AI ECN
PFC Deadlock Prevention
ECN Overlay
iQCN
Maximum Power Consumption 32 x 200 GE + 8 x 400 GE: 1152 W
32 x 100 GE + 8 x 400 GE: 973 W
Power Supply AC: 1200 W
Operating Voltage AC: 90–290 V

1. This content is applicable only to regions outside the Chinese Mainland. Huawei reserves the right to interpret this content.

2. By default, the CE8851-32CQ8DQ-P supports 32 x 100 GE ports. To upgrade, purchase the CE88-RTU-U32CQ hardware Right to Use (RTU) for 32 x 200 GE ports, or purchase the CE88-RTU-8DQ hardware RTU for 8 x 400 GE QSFPDD ports.

Resources

Soporte técnico

Inicio