NetEngine AR5710I-RU-NRGL
Next-generation 5G RU
Este sitio utiliza cookies. Si continúa navegando en este sitio, acepta nuestro uso de cookies. Lea nuestra política de privacidad>
Productos, soluciones y servicios empresariales
NetEngine AR5710I-RU-NRGL
New 5G remote unit (RU) model : comes with dustproof and waterproof design; supports 5G; supports both co-deployment and independent deployment; can be mounted on a pole, wall, and desk; delivers a 5G air interface forwarding performance of 5.4 Gbps.
Flexible Deployment
• Independent deployment & Co-deployment
• Diverse Installation Modes (Desk, Pole and Wall-Mounted)
• Flexible Indoor & Outdoor Deployment
5G Ultra-Broadband
• Carrier aggregation: DL 3CC & UL 2CC
• Peak rate: uplink 500 Mbps; downlink 5.4 Gbps
• Supports 5G, compatible with 4G
• 2 x SIM cards (active/standby)
Industrial Design
• Fanless
• IP rating:IP65
• Operating temperature: -40°C to 65°C (altitude: < 5000 m)
• Power supply mode: PoE/PoE Adapter
Specifications
| Specifications | NetEngine AR5710I-RU-NRGL |
| Forwarding performance (NAT+ACL+QoS, IMIX) | 1.5 Gbps |
| IPSec performance (IMIX) | 0.8 Gbps |
| SD-WAN IPsec performance* (IMIX) | 1.2 Gbps |
| SD-WAN IPsec performance* (512 bytes) | 1.7 Gbps |
| SD-WAN performance** (IMIX) | 1 Gbps |
| SD-WAN performance** (512 bytes) | 1.4 Gbps |
| SD-WAN typical performance***(IMIX) | 720 Mbps |
| SD-WAN typical performance*** (512 bytes) | 900 Mbps |
| Fixed ports**** | 1 x 2.5GE electrical, 1 x 10GE SFP+ |
| Build-in LTE/5G | 5G SA/NSA, 2 x SIM cards (active/standby) |
| 5G RU | Supported |
| Switch RU | Supported |
| WAC (Number of managed APs,default/maximum*****) | 16/64 |
| PoE in | PoE power supply/PoE Adapter |
| Antennas | Built-in 5G/LTE antennas |
| Console port | USB 3.0 Type A |
| USB port | 1 x USB 2.0 |
| Memory | 4 GB |
| Dimensions without packaging (H x W x D) | 80.0 mm x 240.0 mm x 200.0 mm |
| Weight without packaging | 2.21 kg |
| Installation mode | Installed on a pole, wall, or desktop |
| IP rating | IP65 |
*: Scenario where the SD-WAN performance specification applies: IPsec. This specification applies to the combined total of traffic in inbound and outbound directions. Manual switching to the routing mode is required.
**: Scenario where the SD-WAN performance specification applies: IPsec + QoS. This specification applies to the combined total of traffic in inbound and outbound directions. Manual switching to the routing mode is required.
***: Scenario where the typical SD-WAN performance specification applies: IPsec + QoS + SA + AppFlow. This specification applies to the combined total of traffic in inbound and outbound directions. Manual switching to the routing mode is require
****: All fixed ports are LAN ports by default and can be switched to WAN ports.