Huawei OptiXstar P670E

Plug-and-Play

Easy installation in 86-type electrical boxes.
Either AC power supply or photoelectric composite cable.

High Reliability

Type B dual-homing service protection.
802.1X and IPv6/IPv4 firewalls ensure device and network security.

Smart O&M

Variable-length OMCI messages.
Rogue ONT detection and self-regulation.
Ring network detection/PPPoE/DHCP simulation testing.

Parameters	Huawei OptiXstar P670E
Dimensions	Panel: 86 x 86 x 9.5 mm Internal module depth: 35 mm
Weight	Approximately 150 g
Operating Temperature	–5°C to +40°C
Operating Humidity	5–95% RH (non-condensing)
AC Input	100–240 V AC, 50/60 Hz
POF Power Input	48–56 V DC Note: The copper wires in a photoelectric composite cable transmit power in PoE mode and do not transmit data.
IP Rating	IP20
Surge Protection	GE: common mode 2.5 kV POTS:common mode 2.5 kV AC power: common mode 6 kV; differential mode 4 kV
Maximum Power Consumption	P670E: 5.8 W P670E-H: 6.5 W
NNI	GPON
UNI	1 x GE, 1 x POTS
Installation Mode	Indoor 86-box installation
Compliance Certification	CE/CCC
GPON Port	• Port type: SC/UPC • Complying with ITU-T G.984.2, Class B+ • Receiver sensitivity: –27 dBm to –29 dBm • Overload optical power: –8dBm • Transmission rate: upstream 1.244 Gbit/s, downstream 2.488 Gbit/s • Type B single-homing • Type B dual-homing (supported in Layer 2 forwarding)
Ethernet Electrical Port	• Port type: RJ-45 • Auto port speeds (10/100/1000 Mbit/s) • Auto-MDI/MDIX • Configuration of the number of MAC addresses learned • VLAN transparent transmission/VLAN filtering
POTS Port	• Maximum REN: 4 • G.711A/μ, G.729a/b, and G.722 encoding/decoding • T.30/T.38/G.711 fax mode • DTMF • Emergency calls (with the SIP protocol)

Specifications