S7700 Series Switches
Enterprise products, solutions & services
S7700 Series Smart Routing Switches
The S7700 series provide service optimization features like wired and wireless convergence, unified user management, quality awareness (iPCA), H-QoS, and united security. They provide 100 GE ports, support SVF 2.0, and have superb scalability and reliability.
Full Programmability
Uses a fully programmable architecture, enabling new services to be flexibly and quickly provisioned within six months.
Million-Level Hardware Entries
Supports up to 1M MAC entries, 1M NetStream entries, and provides 4 x 100 GE and 8 x 40 GE high-density cards, fully adapting to terminal and service increases in MAN, higher education, and large enterprise scenarios.
Wired and Wireless Convergence
Supports native AC and can manage up to 4K APs. The wireless forwarding performance of a single device reaches 4 Tbit/s. Super Virtual Fabric (SVF) virtualizes core/aggregation plus access switches and wireless APs into a single device, greatly simplifying network management.
Specifications¹
| Item | S7703 | S7703 PoE | S7706/S7706 PoE | S7712 |
| Switching capacity | 1.92 Tbit/s | 4.8 Tbit/s | 4.32 Tbit/s | 4.64 Tbit/s |
| Forwarding performance | 1440 Mpps | 3600 Mpps | 3240 Mpps | 3480 Mpps |
| Redundancy Design | Supervisors, power modules, CMUs, and fan trays | |||
| Wireless Network Management | Native AC AP access control, AP region management, and AP profile management Radio profile management, uniform static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management Deployment of ACs on different network layers |
|||
| User Management | Unified user management 802.1x, MAC address, and Portal authentication Traffic-based and time-based accounting User authorization based on user groups, domains, and time ranges |
|||
| Routing | IPv4 static routes, RIP, OSPF, IS-IS, and BGP4 IPv6 static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ IPv4/IPv6 equal-cost routes, policy routing, and route policy IPv4 and IPv6 stack Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6 IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6 to 4 tunnel, ISATAP tunnel, GRE tunnel, and IPv4-compatible automatic tunnel |
|||
| iPCA | Adds marks on service packets in order to measure the number of lost packets and packet loss ratios in real time with zero payload Measures the number of lost packets and packet loss ratios at the network and device levels on Layer 2 and Layer 3 networks |
|||
| SVF | Up to 256 clients (access switches) and 4,096 APs virtualized into a single device 2-level AS structure Unified management on Huawei and non-Huawei devices |
|||
| Buffer Capacity | Up to 200 ms per port | |||
| Interoperability | VLAN-Based Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST) Link-type Negotiation Protocol (LNP) (similar to DTP) VLAN Central Management Protocol (VCMP) (similar to VTP) For detailed interoperability certifications and test reports, click HERE. |
|||
1. This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.
Technical Support
