CloudEngine S5736-S
Series Multi-GE Switches
Unleash the potential of Wi-Fi 6.
Enterprise products, solutions & services
CloudEngine S5736-S Series Multi-GE Switches
CloudEngine S5736-S Series Switches are standard multi-GE access switches for the Wi-Fi 6 era, featuring 24 downlink ports, four 10 GE SFP+ uplink ports, and one extended slot.
Powered by Huawei's unified Versatile Routing Platform (VRP), the switches offer a range of capabilities, including Intent-Driven Network (IDN) features and flexible Ethernet, as well as enhanced Layer 3 and mature Internet Protocol version 6 (IPv6) networking. Combined with simplified Operations and Maintenance (O&M) and robust Power over Ethernet (PoE) capabilities, the series is designed to work with Wireless Local Area Network (WLAN) Access Points (APs) in campus networks.
CloudEngine S5736-S can be used as an access or aggregation switch on a campus network or as an access switch on a Metropolitan Area Network (MAN).
10 GE Ultra-Fast Access
Supports 24 x 10 GE access ports and 90 W power supply per port.
Ultra-Large Stack Bandwidth
Provides up to 480 Gbit/s stack bandwidth based on additional 4 x 40 GE cards and fixed multi-GE ports.
Flexible Bearer Network
Enables Pay-As-You-Grow (PAYG), with software-defined port rates based on Right-To-Use (RTU) licenses.
Specifications¹
Parameters | CloudEngine S5736-S24UM4XC |
Forwarding Performance | 480 mpps |
Switching Capacity2 | 880 Gbit/s/2.72 Tbit/s |
Fixed Ports | 24 x 100M/1G/2.5G/5G/10G Base-T Ethernet ports, 4 x 10 GE SFP+ |
PoE++ (90 W) | Supported, up to 90 W PoE++ per port |
Extended Slots | One extended slot, supporting 2 x 25 GE SFP28 or 8 x 10 GE SFP+, 4 x 40 GE QSFP+ cards |
MAC Address Table | 32,000 MAC entries MAC address learning and aging Static, dynamic, and blackhole MAC address entries Packet filtering based on source MAC addresses |
VLAN Features | 4094 VLANs Guest VLAN, voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN mapping |
IP Routing | Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6 |
Interoperability | VBST (compatible with PVST/PVST+/RPVST) LNP (similar to DTP) VCMP (similar to VTP) For detailed interoperability certifications and test reports, click here. |
1. This content is applicable only to regions outside the Chinese mainland. Huawei reserves the right to interpret this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash refers to the system’s switching capability.