This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Search
  • Huawei SmartAX MA5801-FL16

    A Compact and low-density box-shaped OLT.

  • Overview
  • Features
  • Specifications
  • Resources

Huawei SmartAX MA5801-FL16

As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density.

The MA5801-FL16-H1 is a compact and low-density box-shaped OLT. It provides multiple fiber to the home (FTTH) solutions to meet the requirements of economical and efficient network construction. It can be flexibly deployed in fast fixed mobile convergence (FMC) scenario, national broadband coverage scenario, and enterprise's all-optical campus scenario.

Lightweight and small size

Lightweight and small size

The lightweight OLT weighs less than 5 kg and occupies 1 U installation space. It can be flexibly adapted to various scenarios.

High density, supporting 16 Flex-PON ports

High density, supporting 16 Flex-PON ports

Supports 16 Flex-PON service ports and works with Flex-PON optical modules to implement Flex-PON access.

Dual power supplies, high reliability

Dual power supplies, high reliability

Supports dual AC or DC power supplies, providing flexible power supply and high reliability.

Easy installation and flexible deployment

Easy installation and flexible deployment

The matching small outdoor cabinet can be installed on a pole, tower, or wall, facilitating installation and reducing engineering costs.

Specifications

Specification SmartAX MA5801-FL16-H1(DC)
Dimensions (W x D x H) (mm) Excluding mounting ears: 442 x 220 x 43.6 Including IEC mounting ears: 482.6 x 220 x 43.6 Including ETSI mounting ears: 531 x 220 x 43.6
Maximum fully-loaded weight2 5kg
Power supply mode DC power supply (dual backup)
AC power supply (dual backup)
Working voltage range DC power supply: –38.4 V to –72 V
AC power supply: 100–240 V
Rated voltage DC power supply: –48 V/–60 V
AC power supply: 110 V/220 V
Maximum input current DC power supply: 6 A
AC power supply: 2.5 A
Ambient temperature –40°C to +65°C
The device can start up at a lowest temperature of –25°C.
Ambient humidity 5%–95% RH
Atmospheric pressure 70–106 kPa
Altitude < 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude.
System switching capacity 240 Gbit/s
MAC addresses 32768
Access ONT 2048
IPv4 routing table 8192
IPv6 routing table 4096
ARP table 16384
Bit error rate (BER) in full load When FEC is enabled, the GPON BER is less than 10 e-10, and the XG(S)-PON BER is less than 10 e-12.
Upstream ports 4GE/10GE
Service ports 16 Flex-PON
System reliability specifications System availability for the typical configuration: > 99.999% Mean time between failures (MTBF): about 45 years
Power consumption • DC power supply:
• Static power consumption: 72W
• Typical power consumption: 127W
• Maximum power consumption: 228W
• AC power supply:
• Static power consumption: 73W
• Typical power consumption: 128W
• Maximum power consumption: 229W

1. This content is applicable only to regions outside the Chinese mainland. Huawei reserves the right to interpret this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash (/) means the system's switching capability.

TOP