Size daha iyi bir deneyim sunmak için çerezleri kullanıyoruz. Ziyaretinizi varsayılan ayarlarla gerçekleştirerek, çerez kullanımına izin vermiş oluyorsunuz. Çerez politikasını inceleyin.

Yardıma ihtiyacınız varsa, lütfen buraya tıklayın:

CloudEngine S5736-S Series Multi-GE Switches

CloudEngine S5736-S Series Switches are standard multi-GE access switches for the Wi-Fi 6 era, featuring 24 downlink ports, four 10 GE SFP+ uplink ports, and one extended slot.

Powered by Huawei's unified Versatile Routing Platform (VRP), the switches offer a range of capabilities, including Intent-Driven Network (IDN) features and flexible Ethernet, as well as enhanced Layer 3 and mature Internet Protocol version 6 (IPv6) networking. Combined with simplified Operations and Maintenance (O&M) and robust Power over Ethernet (PoE) capabilities, the series is designed to work with Wireless Local Area Network (WLAN) Access Points (APs) in campus networks.

CloudEngine S5736-S can be used as an access or aggregation switch on a campus network or as an access switch on a Metropolitan Area Network (MAN).

Huawei

Specifications¹

Parameters CloudEngine S5736-S24UM4XC
Forwarding Performance 480 mpps
Switching Capacity2 880 Gbit/s/2.72 Tbit/s
Fixed Ports 24 x 100M/1G/2.5G/5G/10G Base-T Ethernet ports, 4 x 10 GE SFP+
PoE++ (90 W) Supported, up to 90 W PoE++ per port
Extended Slots One extended slot, supporting 2 x 25 GE SFP28 or 8 x 10 GE SFP+, 4 x 40 GE QSFP+ cards
MAC Address Table 32,000 MAC entries
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
VLAN Features 4094 VLANs
Guest VLAN, voice VLAN
GVRP
MUX VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN mapping
IP Routing Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6
Interoperability VBST (compatible with PVST/PVST+/RPVST)
LNP (similar to DTP)
VCMP (similar to VTP)
For detailed interoperability certifications and test reports, click here.

1. This content is applicable only to regions outside the Chinese mainland. Huawei reserves the right to interpret this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash refers to the system’s switching capability.

Ortaklar için

İş ortağı iseniz, daha fazla pazarlama kaynağı edinmek için buraya tıklayın.
Proje sorgulamak, siparişleri yönetmek, destek almak, veya Huawei İş Ortakları hakkında daha fazla bilgi edinmek adına Ortaklık alanını ziyaret etmek için buraya tıklayın.