DBS5900 Distributed Base Stations
wireless access device for the eLTE wireless broadband private network solution
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Enterprise products, solutions & services
wireless access device for the eLTE wireless broadband private network solution
DBS5900 Distributed Base Stations
Supported Frequency Band
Distributed Architecture
Critical Communication
Specifications
| Model number | BBU5900(3GPP) | |
| Form | Indoor,Outdoor | |
| Board supported(Macro) | Main control board | UMPTe2, UMPTe3, UMPTg2, UMPTg3 |
| Baseband processing board | UBBPe4, UBBPg1a, UBBPg2 | |
| Satellite-card board | USCUb18, USCUb16, USCUb14, USCUb11 | |
| Fan module | FANf | |
| Power module | UPEUe | |
| Environment monitoring unit | UEIUb | |
| Equipment specifications | Input power | UPEUe:-48V DC |
| Voltage range | -38.4V DC to -57V DC | |
| Dimensions (H x W x D) | 86 mm x 442 mm x 310 mm (3.39 in. x 17.40 in. x 12.20 in.) | |
| Weight | 18 kg (39.69 lb) in full configuration | |
| Heat dissipation capability | 2100 W (configured with a FANf) | |
| Operating Temperature | Long-term operation: –20°C to +55°C (–4°F to +131°F) | |
| Relative humidity | 5% RH to 95% RH | |
| Protection Rating | IP20 | |
| Air Pressure | 70 kPa to 106 kPa | |
| Noise sound power level | ETS 300 753 3.1 ≤7.2bels |
|
| Highlight | Highlight1 | 6 RAT in One Box |
| Highlight2 | Support 5G long-term evolution | |
| Model(Replaceable) | RRU5901(1800) | |
| RRU Form | Blade | |
| Basic Specifications | Frequency Band (MHz) | 1800 |
| Frequency Range (MHz) | UL:1710 to 1785 DL:1805 to 1880 |
|
| Mode | LTE (FDD), GL, LM, GLM, LN (SUL), GLN (SUL), NR (FDD), GN (FDD), LN (FDD), GLN (FDD), LMN (FDD) | |
| IBW(MHz) | 45 | |
| Protocal FrequencyBand | Band 3/n3 | |
| RF Specifications | TX/RX Channel | 4T4R |
| NR SUL Carrier Configuration | 2L1N(SUL); 8G2L1N(SUL) |
|
| Carrier Capacity | GSM: 8 carriers LTE FDD: 2 carriers LTE NB-IoT: 8 carriers when the NB-IoT multi-carrier function is enabled and 1 carrier when the NB-IoT multi-carrier function is disabled NR SUL: 1 carrier NR FDD: 2 carriers |
|
| Output Power(W) | 4x40W | |
| GSM Receiver Sensitivity with One Antenna (dBm) | -114.0 | |
| LTE FDD Receiver Sensitivity with One Antenna (dBm) | -106.6 | |
| NB-IoT Receiver Sensitivity with One Antenna (dBm) | -127.3 | |
| Support Band | LTE FDD: 5/10/15/20 NR FDD: 5/10/15/20/30 |
|
| NR FDD Receiver Sensitivity with One Antenna (dBm) | -106.3 | |
| RX Frequency Band (MHz) | 1710 to 1785 | |
| TX Frequency Band (MHz) | 1805 to 1880 | |
| Engineering Specifications | Dimensions (H x W x D) | 400 mm x 300 mm x 100 mm (15.75 in. x 11.81 in. x 3.94 in.) (12 L) |
| Weight (kg) | 15 kg (33.08 lb, excluding mounting kits) | |
| Typical Power Consumption for an RRU(W) | Typical Power Consumption (W)a: 337 a: The typical power consumption of an RF module is measured when the ambient temperature is 25°C (77°F) and the traffic load reaches 50%. The actual power consumption has a 10% deviation from this value. |
|
| Operating Temperature | Without solar radiation: –40°C to +55°C (-40°F to +131°F) With solar radiation of 1120 W/m2: -40°C to +50°C (-40°F to +122°F) |
|
| Protection Rating | IP65 | |
| Relative Humidity | 5% RH to 100% RH | |
| Absolute humidity | 1 g/m3 to 30 g/m3 | |
| Air Pressure | 70kPa to 106kPa | |
| Anti-Seismic Performance | NEBS GR63 zone4 | |
| Surge Protection Specifications | DC:20kA | |
| power | -48V DC | |
| Operating Voltage | -36V DC to -57V DC | |
| CPRI Port Specifications | Number of CPRI Ports | 2 |
| CPRI Data Rate (Gbit/s) | 1.25/2.5/4.9/9.8 | |
| Cascading Levels | GSM:6 LTE FDD:4 LTE NB-IoT:4 NR FDD:4 NR SUL:4 |
|
| Maximum Distance from the BBU(km) | GSM:40 LTE FDD:When the LBBPc or LBBPd1 is configured: 20 When the LBBPd2 or UBBP is configured: 40 When the LBBPd3 is configured: 40 (number of cells ≤ 3); 20 (number of cells ≥ 4) LTE NB-IoT:20 NR FDD:20 NR SUL:20 |
|
| Cpri Protocal Type | CPRI | |
| Highlight | Highlight1 | New generation of power amplifier technology, higher efficiency, lower consumption |
| Highlight2 | Support 5G Evolution | |
| Highlight3 | Receive sensitivity increased by 0.2dB than the previous generation | |
| Platform | WUYI | |
| Frequency Band (MHz) | 1800 | |
| Mode | GLN(SUL),GLN(FDD),LMN(FDD),LN(SUL),GN(FDD),LN(FDD),LTE FDD,NR FDD,GLM,GL,LM | |
| TX/RX Channel | 4T4R | |
| Output Power | 4x40W | |
| LOWFrequency | 1710 | |
| HIGHFrequency | 1880 | |
| BOOK RRU | NO | |
| Calculable Engineering Specifications | Weight (kg) | 15 |
| Height(mm) | 400 | |
| Width(mm) | 300 | |
| Depth(mm) | 100 | |
| Typical Power Consumption(W) | 337 | |
| Keyshot | RRU5901_540 | |
Copyright © 2024 Huawei Technologies Co., Ltd. All rights reserved.
