Huawei SmartAX MA5800
Enterprise products, solutions & services
Huawei SmartAX MA5800
The MA5800 multi-service access device is a 4K/8K/VR-ready OLT in the gigabit ultra-broadband era. It supports the PON/10G PON/GE/10GE shared platform. The MA5800 adopts the distributed architecture and supports multi-media gigabit aggregation, optimal 4K/8K/VR video experience, multi-service virtualization sharing platform, and smooth evolution to 50G PON. The MA5800 series is mainly available as the MA5800-X7.
Distributed architecture with separated control and forwarding
The MA5800 is the industry's first OLT with distributed architecture. The high-speed forwarding capability of the distributed architecture supports smooth evolution to 50G PON. The control and forwarding separation architecture provides flexible service O&M. Network upgrades do not affect services and ensure service reliability.
Any Port Any Service Flex-PON Solution
The Flex-PON Solution reduces the initial investment required and offers smooth upgrade and evolution from GPON to XG(S)-PON. A Flex-PON board supports GPON, XG-PON, XGS-PON, and XG(S)-PON combo with the corresponding optical module, and reduces OPEX by smooth evolution without board replacement.
Multi-media Gigabit Aggregation
The PON/P2P solution implements unified access and aggregation of optical fibers, copper lines, and cable media. It transforms an independent multi-media access network into an access network with a unified architecture, implementing unified access, aggregation, and management, simplifying network architecture and O&M.
Green and Energy-saving
Huawei SmartAX MA5800 OLT platform automatically detects the usage or traffic load of each functional module, when the module is idle or under low load, it automatically switches the module to the disabled state or low power consumption mode to reduce the power consumption.
Specifications
| Specification | SmartAX MA5800-X7 |
| Switching Capacity of the Control Board(load sharing mode) | MPLA：3.6 Tbit/s MPLB：7 Tbit/s |
| Maximum Bandwidth per Service Slot(load sharing mode)2 | MPLA：100 Gbit/s MPLB：200 Gbit/s |
| Maximum Number of MAC Address | 262143 |
| IGMP Concurrent Processing Capability | 8000 pps |
| Maximum Number of Upstream Ports on the Control Boards in a Subrack (load sharing mode) | 8 x 10GE/GE |
| GPON Ports3 | 16 |
| Flex-PON3 | 16 |
| XG(S)-PON Ports3 | 16 |
| P2P GE/FE3 | 48 |
| P2P 10GE3 | 24 |
1. This content is applicable only to regions outside the Chinese mainland. Huawei reserves the right to interpret this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash (/) means the system's switching capability.
3. Capacity of single board.
Resource
