Este site utiliza cookies. Ao continuar navegando no site, você concorda com esse uso. Leia nossa política de privacidade>
Se precisar de ajuda, clique aqui:
CloudEngine S5736-S Series Switches are standard multi-GE access switches for the Wi-Fi 6 era, featuring 24 downlink ports, four 10 GE SFP+ uplink ports, and one extended slot.
Powered by Huawei's unified Versatile Routing Platform (VRP), the switches offer a range of capabilities, including Intent-Driven Network (IDN) features and flexible Ethernet, as well as enhanced Layer 3 and mature Internet Protocol version 6 (IPv6) networking. Combined with simplified Operations and Maintenance (O&M) and robust Power over Ethernet (PoE) capabilities, the series is designed to work with Wireless Local Area Network (WLAN) Access Points (APs) in campus networks.
CloudEngine S5736-S can be used as an access or aggregation switch on a campus network or as an access switch on a Metropolitan Area Network (MAN).
Supports 24 x 10 GE access ports and 90 W power supply per port.
Provides up to 480 Gbit/s stack bandwidth based on additional 4 x 40 GE cards and fixed multi-GE ports.
Enables Pay-As-You-Grow (PAYG), with software-defined port rates based on Right-To-Use (RTU) licenses.
|Forwarding Performance||480 mpps|
|Switching Capacity2||880 Gbit/s/2.72 Tbit/s|
|Fixed Ports||24 x 100M/1G/2.5G/5G/10G Base-T Ethernet ports, 4 x 10 GE SFP+|
|PoE++ (90 W)||Supported, up to 90 W PoE++ per port|
|Extended Slots||One extended slot, supporting 2 x 25 GE SFP28 or 8 x 10 GE SFP+, 4 x 40 GE QSFP+ cards|
|MAC Address Table||32,000 MAC entries
MAC address learning and aging
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
|VLAN Features||4094 VLANs
Guest VLAN, voice VLAN
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports
1:1 and N:1 VLAN mapping
|IP Routing||Static route, RIPv1/v2, RIPng, OSPF, OSPFv3, ECMP, IS-IS, IS-ISv6, BGP, BGP4+, VRRP, and VRRP6|
|Interoperability||VBST (compatible with PVST/PVST+/RPVST)
LNP (similar to DTP)
VCMP (similar to VTP)
For detailed interoperability certifications and test reports, click here.
1. This content is applicable only to regions outside the Chinese mainland. Huawei reserves the right to interpret this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash refers to the system’s switching capability.