AirEngine 5760-11DH Optical Radio Unit
ORU in Zero-Roaming Distributed Wi-Fi Solution
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Enterprise products, solutions & services
ORU in Zero-Roaming Distributed Wi-Fi Solution
AirEngine 5760-11DH Optical Radio Unit
Huawei AirEngine 5760-11DH is an Optical Radio Unit (ORU) in Zero-Roaming Distributed Wi-Fi Solution and receives radio signals from a Distributed Access Point (DAP). Typically, ORUs are mounted on the ceilings of corridors in a hospital ward area and expand wireless signals to rooms through AUs, delivering wireless access services to hospital tablets, mobile ward-round, and IoT terminals.
Zero-Roaming Distributed Wi-Fi Solution consists of the DAP, ORUs, and Antenna Units (AUs). ORUs must work with a DAP (AirEngine 9700D-S) and AUs, but cannot work independently.
Wide Coverage
Each DAP can connect to a maximum of eight ORUs through ultra-long hybrid cables, and each ORU can connect to a maximum of eight Wi-Fi AUs and one IoT antenna (433 MHz). In this manner, signals from one DAP can cover up to 64 rooms, delivering on-demand 500 m coverage across floors.
Zero Roaming
The intranet and extranet wireless signals broadcast by 64 AUs connected to the same DAP operate on the same frequency band and channel. This ensures that the solution achieves zero roaming, zero handover, zero packet loss, and service continuity within the coverage area of the AUs.
Tri-Network Isolation and Converged Deployment
IoT base stations and extranet APs feed signals into the DAP, which then transmits the signals to ORUs and AUs through hybrid cables. This achieves converged deployment and physical isolation of the intranet, extranet, and IoT network, ensuring security and reliability.
Specifications
| Parameters | AirEngine 5760-11DH |
| Dimensions (H x W x D) | 35 mm x 220 mm x 220 mm |
| Power Input | PoE via a hybrid cable (receiving power from a DAP) DC: 42.5 V to 57 V (through a Phoenix connector) |
| Maximum Power Consumption | 21 W |
| Ports |
1 x Hybrid port 9 x SMA RF ports (8 x Wi-Fi + 1 x 433 MHz IoT) |