Huawei SmartAX MA5801-FL16
A Compact and low-density box-shaped OLT.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Продукты, решения и услуги для предприятий
Смартфоны, ПК и планшеты, носимые устройства и многое другое
A Compact and low-density box-shaped OLT.
Huawei SmartAX MA5801-FL16
As optical fiber access nodes keep moving closer to end users, OLTs are closer to end users. Deployment scenarios are complex and diversified. In this case, network needs OLTs with small volume and low density.
The MA5801-FL16-H1 is a compact and low-density box-shaped OLT. It provides multiple fiber to the home (FTTH) solutions to meet the requirements of economical and efficient network construction. It can be flexibly deployed in fast fixed mobile convergence (FMC) scenario, national broadband coverage scenario, and enterprise's all-optical campus scenario.
Lightweight and small size
The lightweight OLT weighs less than 5 kg and occupies 1 U installation space. It can be flexibly adapted to various scenarios.
High density, supporting 16 Flex-PON ports
Supports 16 Flex-PON service ports and works with Flex-PON optical modules to implement Flex-PON access.
Dual power supplies, high reliability
Supports dual AC or DC power supplies, providing flexible power supply and high reliability.
Easy installation and flexible deployment
The matching small outdoor cabinet can be installed on a pole, tower, or wall, facilitating installation and reducing engineering costs.
Specifications
| Specification | SmartAX MA5801-FL16-H1(DC) |
| Dimensions (W x D x H) (mm) | Excluding mounting ears: 442 x 220 x 43.6 Including IEC mounting ears: 482.6 x 220 x 43.6 Including ETSI mounting ears: 531 x 220 x 43.6 |
| Maximum fully-loaded weight2 | 5kg |
| Power supply mode | DC power supply (dual backup) AC power supply (dual backup) |
| Working voltage range | DC power supply: –38.4 V to –72 V AC power supply: 100–240 V |
| Rated voltage | DC power supply: –48 V/–60 V AC power supply: 110 V/220 V |
| Maximum input current | DC power supply: 6 A AC power supply: 2.5 A |
| Ambient temperature | –40°C to +65°C The device can start up at a lowest temperature of –25°C. |
| Ambient humidity | 5%–95% RH |
| Atmospheric pressure | 70–106 kPa |
| Altitude | < 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude. |
| System switching capacity | 240 Gbit/s |
| MAC addresses | 32768 |
| Access ONT | 2048 |
| IPv4 routing table | 8192 |
| IPv6 routing table | 4096 |
| ARP table | 16384 |
| Bit error rate (BER) in full load | When FEC is enabled, the GPON BER is less than 10 e-10, and the XG(S)-PON BER is less than 10 e-12. |
| Upstream ports | 4GE/10GE |
| Service ports | 16 Flex-PON |
| System reliability specifications | System availability for the typical configuration: > 99.999% Mean time between failures (MTBF): about 45 years |
| Power consumption | • DC power supply: • Static power consumption: 72W • Typical power consumption: 127W • Maximum power consumption: 228W • AC power supply: • Static power consumption: 73W • Typical power consumption: 128W • Maximum power consumption: 229W |
1. This content is applicable only to regions outside the Chinese mainland. Huawei reserves the right to interpret
this content.
2. The value before the slash (/) refers to the device's switching capability, while the value after the slash (/)
means the system's switching capability.
