OptiXstar P893E
XGS-PON Pro PoE ONU
ผลิตภัณฑ์ โซลูชั่น และบริการสำหรับองค์กรธุรกิจ
XGS-PON Pro PoE ONU
OptiXstar P893E
Ultra Wide Access
▪ XGS-PON Pro supports 12.5Gbps
▪ PON upstream load sharing, supporting 25 Gbit/s upstream transmission
▪ 10GE port, PoE++, Wi-Fi 7 AP access
High Reliability，High Security
▪ Type B/Type C service protection
▪ 802.1x authentication、 Firewall、DoS/ARP anti-attacks and other security features
Easy O&M
▪ Centralized management on eSight
▪ Automatic service configuration
Specifications
| Parameters | OptiXstar P893E |
| Dimensions（W×D×H) | 220mm × 150mm × 43.6mm |
| NNI | 2 * XGS-PON Pro（1*BOB+1*SFP） |
| UNI | 4*GE+4*GE(PoE+)+2*XGE(PoE++) |
| Static power consumption | 11.72W |
| Maximum power consumption | 22.37W (excluding PoE power consumption) |
| Installation mode | Placed horizontally on a desktop, installed under a desk, installed on a wall, or installed in a cabinet or network box |
| Operating temperature | -5°C ~ +45°C |
| Heat dissipation mode | Natural heat dissipation |
| PoE output power | Maximum total output power: 120 W GE ports 1–4 do not support PoE GE ports 5–8 support a maximum of 30 W (PoE+) XGE ports 9-10 support a maximum of 60 W (PoE++) |
| PON port | • Port mode: XGS-PON Pro − Port type: SC/UPC − Transmission rate: RX 12.44 Gbit/s, TX 12.44 Gbit/s − Optical receiver sensitivity: -22 dBm − Overload optical power: -7 dBm • Port mode: XGS-PON − Port type: SC/UPC − Transmission rate: 9.953 Gbit/s in the uplink and 9.953 Gbit/s in the downlink − Receiver sensitivity: -28 dBm − Overload optical power: -8 dBm |
| SFP port | • Interface mode: XGS-PON Pro − Optical module type: XGS-PON Pro optical module − Optical module encapsulation mode: SFP+ − Interface type: SC/UPC − Transmission rate: 12.44 Gbit/s in the uplink and 12.44 Gbit/s in the downlink − Receiver sensitivity: -27 dBm − Overload optical power: -7 dBm • Interface mode: XGS-PON − Optical module type: XGS-PON optical module − Optical module encapsulation mode: SFP+ − Interface type: SC/UPC − Transmission rate: 9.953 Gbit/s in the uplink and 9.953 Gbit/s in the downlink − Receiver sensitivity: -28 dBm − Overload optical power: -8 dBm NOTE The SFP interface mode can be used only when the corresponding optical module is used. |
| GE/XGE(electrical) port | • Port type: RJ45 • GE port: Auto ports speed(10/100/1000 Mbit/s ) • XGE(electrical) port: Auto ports speed(1/2.5/5/10 Gbit/s) • MDI/MDIX automatic configuration • Configuring the number of learnable mac addresses • Ethernet port-based VLAN transparent transmission and filtering • GE ports 5–8 support PoE+XGE supports PoE++ |
| Networking Protection | • Type B single-homing protection • Type B dual-homing protection • Type C single-homing protection • Type C dual-homing protection • PON upstream load sharing |
| Layer 2 Management | • MAC address management • Layer 2 bridging • Layer 2 isolation • DHCP Option82 • PITP • BPDU transparent transmission • LLDP/LLDP-MED • IPv6 (Layer 2 transparent transmission) |
| Security | • 802.1x • IPv6/IPv4 firewall • Filtering based on MAC/IP/URL • Dos/ARP anti-attacks • Static MAC address binding • Device access control • Supports prevention of unauthorized DHCP server connection • ONU Port-Level HardIsolated |
Copyright © 2025 Huawei Technologies Co., Ltd. All rights reserved.
