AP2010DN Wall Plate Access Point Details Page

AP2010DN Wall Plate Access Point Data Sheet

Product appearance

AP2010DN Wall Plate Access Point

Interfaces

AP2010DN Wall Plate Access Point interfaces

LED indicators

Type Color Status Description
Default Status after Power-on Green Steady on AP is just powered on but software has not started
Software Startup Status Green Blink once then steady on After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started the indicator remains steady green
Running Status Green Blinks once every 2 seconds (0.5 Hz)

System is running properly, Ethernet connection is normal, and STAs are associated with the AP

Blinks once every 5 seconds (0.2 Hz) System is running properly, Ethernet connection is normal, and no STA is associated with the AP. The system is in low-power consumption state
Alarm Green Blinks once every 0.25 seconds (4 Hz)
  1. The software is being upgraded
  2. After the software is uploaded and started, the AP enters the registration state, but has not registered successfully with the AC 
  3. If the registration fails the CAPWAP link is disconnected
Fault Red Steady on

A fault, such as a DRAM detection or system software loading failure has occurred. The fault cannot be automatically fixed and must be fixed manually

Product characteristics

WLAN features

  • Complies with IEEE 802.11a/b/g/n
  • Provides a maximum rate of 300 Mbit/s
  • Maximum Ratio Combining (MRC)
  • Cyclic Shift Diversity (CSD)
  • Maximum-Likelihood Detection (MLD)
  • Data unit aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
  • Supports 802.11 Dynamic Frequency Selection (DFS)
  • Short GI in 20 MHz and 40 MHz modes
  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • Automatic (Default) and manual rate adjustment
  • WLAN channel management and channel rate adjustment
  • Automatic channel scanning and interference avoidance
  • Service Set Identifier (SSID) hiding, support for SSIDs in Chinese
  • Automatic SSID hiding: An AP automatically hides its SSIDs when the number of access terminals reaches the maximum
  • Signal Sustain Technology (SST)
  • Unscheduled Automatic Power Save Delivery (U-APSD)
  • Control and Provisioning of Wireless Access Points (CAPWAP)
  • Automatic login
  • Hotspot 2.0
  • 802.11k and 802.11v smart roaming

Network features

  • Complies with IEEE 802.3u
  • Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
  • SSID-based VLAN assignment
  • 4,094 VLAN IDs (1 to 4,094) and a maximum of 8 virtual APs (VAPs) for each radio frequency
  • AP control channel in tagged and untagged mode
  • DHCP client, obtaining IP addresses through DHCP
  • Tunnel data forwarding and direct data forwarding
  • STA isolation in the same VLAN
  • Multicast Domain Name Service (mDNS) gateway protocol: Supports AirPlay and AirPrint service sharing between users of different VLANs
  • Access Control Lists (ACLs)
  • Link Layer Discovery Protocol (LLDP)
  • Uninterrupted service forwarding upon CAPWAP channel disconnection
  • Unified authentication on the AC
  • AC dual-link backup and VRRP hot backup
  • Native IPv6
  • IPv4/IPv6 dual stack
  • IPv6 Portal
  • IPv6 SAVI
  • IPv4/IPv6 ACL
  • Soft GRE

QoS features

  • Priority mapping and packet scheduling based on a WiFi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • WMM parameter management for each radio frequency
  • WMM power saving
  • Priority mapping for upstream packets and flow-based mapping for downstream packets
  • Queue mapping and scheduling
  • User-based bandwidth limiting
  • Adaptive bandwidth management based on the number of users and radio environment to improve user experience

Security features

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2-PSK authentication and encryption
  • WPA/WPA2-802.1x authentication and encryption
  • WAPI authentication and encryption
  • Supports Wireless Intrusion Detection System (WIDS), including:
    • Rogue AP and STA detection
    • Attack detection
    • STA/AP blacklist and whitelist
  • DHCP snooping
  • Dynamic ARP Inspection (DAI)
  • IP Source Guard (IPSG)
  • 802.11w Protected Management Frames (PMFs)

Maintenance features

  • Unified management and maintenance on the AC
  • Automatic login and configuration loading plus Plug-and-Play (PnP)
  • Batch upgrade
  • Local AP management using Telnet
  • Real-time configuration monitoring and fast fault location using the NMS
  • System status alarm

BYOD

  • Identifies the device type according to the Organizationally Unique Identifier (OUI) in the MAC address
  • Identifies the device type according to the User Agent (UA) information in an HTTP packet
  • Identifies the device type according to DHCP options
  • The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets

Spectrum analysis

  • Identifies interference sources, including:
    • Bluetooth devices
    • Microwave ovens
    • Cordless phones
    • ZigBees
    • Game controllers
    • 2.4 GHz/5 GHz wireless video and audio devices
    • Baby monitors
  • Works with Huawei eSight to locate and perform spectrum analysis on interference sources

Product specifications

Specifications

Items Specifications
Technical Specifications Dimensions (H x W x D) 1.7 in. x 3.3 in. x 3.3 in. (45 mm x 86 mm x 86 mm)
Weight ≤ 0.4 lb. (0.2 kg)
System memory 128 MB
Power Specifications Power input PoE power: PoE function complies with IEEE 802.3af and 802.3at
Maximum power consumption

5.5W

Note: Maximum power consumption depends on local laws

Environment Parameters Operating temperature 32oF to 104oF (0oC to 40oC)
Storage temperature -40oF to 158oF (-40oC to 70oC)
Humidity 5% to 95% (non-condensing)
Altitude -196.8 ft. to 16,404.1 ft. (-60m to 5,000m)
Atmospheric pressure 20.6 inHg to 31.3 inHg (70 kPa to 106 kPa)

Radio

Items Specifications
Antenna Type Built-in
Antenna Gain
  • 2.4 GHz: 2 dBi
  • 5 GHz: 2.5 dBi
Maximum Number of Users ≤ 128
Maximum Transmit Power for Each Radio Frequency
  • 2.4 GHz: 16 dBm
  • 5 GHz: 14 dBm

Note: Actual transmit power depends on local laws and regulations. The AP2010DN uses a 86-type box and applies only to countries and regions that support 86-type boxes

You can adjust the transmit power from maximum to 1 dBm in 1 dB increments

Maximum Number of Non-overlapping Channels

2.4 GHz

802.11b/g

20 MHz: 3

802.11n

  • 20 MHz: 3
  • 40 MHz: 1

5 GHz

802.11a

20 MHz: 5

802.11n

  • 20 MHz: 5
  • 40 MHz: 2

Note: This table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Code & Channels compliance status

Channel Rates

  • 802.11b: 1, 2, 5.5, and 11 Mbit/s
  • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
  • 802.11n: 6.5 to 300 Mbit/s
Receiver Sensitivity

2.4 GHz

802.11b (CCK)

  • -89 dBm @ 1 Mb/s
  • -88 dBm @ 2 Mb/s
  • -88 dBm @ 5.5 Mb/s
  • -87 dBm @ 11 Mb/s

2.4 GHz

802.11g (Non-HT20)

  • -88 dBm @ 6 Mb/s
  • -85 dBm @ 9 Mb/s
  • -85 dBm @ 12 Mb/s
  • -84 dBm @ 18 Mb/s
  • -81 dBm @ 24 Mb/s
  • -78 dBm @ 36 Mb/s
  • -74 dBm @ 48 Mb/s
  • -71 dBm @
  • 54 Mb/s

2.4 GHz

802.11n (HT20)

  • -88 dBm @ MCS0
  • -85 dBm @ MCS1
  • -84 dBm @ MCS2
  • -81 dBm @ MCS3
  • -77 dBm @ MCS4
  • -74 dBm @ MCS5
  • -72 dBm @ MCS6
  • -69 dBm @ MCS7

2.4 GHz

802.11n (HT40)

  • -88 dBm @ MCS0
  • -84 dBm @ MCS1
  • -82 dBm @ MCS2
  • -77 dBm @ MCS3
  • -74 dBm @ MCS4
  • -71 dBm @ MCS5
  • -70 dBm @ MCS6
  • -69 dBm @ MCS7
 
--

5 GHz

802.11a (Non-HT20)

  • -88 dBm @ 6 Mb/s
  • -87 dBm @ 9 Mb/s
  • -86 dBm @ 12 Mb/s
  • -83 dBm @ 18 Mb/s
  • -80 dBm @ 24 Mb/s
  • -77 dBm @ 36 Mb/s
  • -72 dBm @ 48 Mb/s
  • -71 dBm @ 54 Mb/s

5 GHz

802.11n (HT20)

  • -88 dBm @ MCS0
  • -85 dBm @ MCS1
  • -83 dBm @ MCS2
  • -78 dBm @ MCS3
  • -75 dBm @ MCS4
  • -71 dBm @ MCS5
  • -70 dBm @ MCS6
  • -69 dBm @ MCS7

5 GHz

802.11n (HT40)

  • -87 dBm @ MCS0
  • -84 dBm @ MCS1
  • -81 dBm @ MCS2
  • -78 dBm @ MCS3
  • -74 dBm @ MCS4
  • -71 dBm @ MCS5
  • -69 dBm @ MCS6
  • -68 dBm @ MCS7

Networking and applications

 

The AP2010DN complies with IEEE 802.11a/b/g/n and is designed to provide wired, wireless, and phone connections. Its comprehensive service support capabilities and high-security, simple network deployment, automatic AC discovery and configuration, and real-time management and maintenance functions make it a perfect choice for hotels, apartments, office buildings, and other enterprises.

Using a standard 86mm plate customers can easily install it in a junction box, without affecting room space or appearance and it is equipped with built-in antennas, a hidden indicator, and a sliding panel.

Typical Fit AP networking

Typical Fit AP networking

In this example, the AP functions as a Fit AP. The AC is responsible for user access, AP go-online, AP management, authentication, routing, security, and QoS.