CloudEngine 6800 Series Data Center Switches

CloudEngine 6800 Series Data Center Switches

Product appearance

The CE6800 comes in seventeen models:
Model and Appearance Description

CE6870-48T6CQ-EI

  • 48 x 10 GE BASE-T ports
  • 6 x 100 GE QSFP28 ports or 6 x 40 GE QSFP+ ports

CE6870-48S6CQ-EI

  • 48 x 10 GE SFP+ ports
  • 6 x 100 GE QSFP28 ports or 6 x 40 GE QSFP+ ports

CE6870-24S6CQ-EI

  • 24 x 10 GE SFP+ ports
  • 6 x 100 GE QSFP28 ports or 6 x 40 GE QSFP+ ports

CE6860-48S8CQ-EI

  • 48 x 25 GE SFP28 ports
  • 8 x 100 GE QSFP28 ports

CE6850U-48S6Q-HI

  • 48 x 10 GE SFP+ ports, or 2G/4G/8G FC ports
  • 6 x 40 GE QSFP+ ports

CE6855-48S6Q-HI

  • 48 x 10 GE SFP+ ports
  • 6 x 40 GE QSFP+ ports

CE6855-48T6Q-HI

  • 48 x 10 GE Base-T ports
  • 6 x 40 GE QSFP+ ports

CE6851-48S6Q-HI

  • 48 x 10 GE SFP+ ports
  • 6 x 40 GE QSFP+ ports

CE6850-48T6Q-HI

  • 48 x 10 GE Base-T ports
  • 6 x 40 GE QSFP+ ports

CE6850-48S6Q-HI

  • 48 x 10 GE SFP+ ports
  • 6 x 40 GE QSFP+ ports

CE6850-48S4Q-EI

  • 48 x 10 GE SFP+ ports
  • 4 x 40 GE QSFP+ ports

CE6810-48S4Q-LI

  • 48 x 10 GE SFP+ ports
  • 4 x 40 GE QSFP+ ports

CE6810-32T16S4Q-LI

  • 32 x 10 GE BASE-T ports
  • 16 x 10 GE SFP+ ports
  • 4 x 40 GE QSFP+ ports

CE6810-24S2Q-LI

  • 24 x 10 GE SFP+ ports
  • 2 x 40 GE QSFP+ ports

Product specifications

CE6870 Product Characteristics

Item CE6870-48T6CQ-EI CE6870-48S6CQ-EI CE6870-24S6CQ-EI
10 GE SFP+ ports NA 48 24
10 GE BASE-T 48 NA NA
100 GE QSFP28 ports 6 6 6
Switching Capacity 2.16 Tbit/s 2.16 Tbit/s 1.68 Tbit/s
Forwarding Rate 720 Mpps
Airflow Design Front-to-back or back-to-front
Device Virtualization iStack: For details about the configuration, please see:
http://support.huawei.com/onlinetoolsweb/virtual/en/dc/stack_index.html?dcb
Network Virtualization TRILL
VXLAN routing and bridging
BGP-EVPN
QinQ access VXLAN
IPv6 over VXLAN
SDN Agile Controller
VMware NSX
Network Convergence FCoE
DCBX, PFC, and ETS
Programmability Programming on the OPS
CE modules for Ansible released on open source websites
Traffic Analysis NetStream
sFlow
VLAN Adding access, trunk, and hybrid interfaces to VLANs
Default VLAN
QinQ
MUX VLAN
GVRP
ACL 20k (Ingress and Egress shared)
MAC Address Table Maximum: 750k
Dynamic learning and aging of MAC addresses
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
MAC address limiting based on ports and VLANs
ARP Maximum: 750k
ND Maximum: 96k
IPv4 FIB Maximum: 380k
IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
IPv6 FIB Maximum: 128k
IPv6 IPv6 Neighbor Discovery (ND)
Path MTU Discovery (PMTU)
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6
Multicast FIB Maximum: 32k
Multicast IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
IGMP snooping
IGMP proxy
Fast leave of multicast member interfaces
Multicast traffic suppression
Multicast VLAN
Reliability LACP
STP, RSTP, VBST, and MSTP
BPDU protection, root protection, and loop protection
Smart Link and multi-instance
DLDP
ERPS (G.8032)
VRRP, VRRP load balancing, and BFD for VRRP
BFD for BGP/IS-IS/OSPF/Static route
QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
Actions of ACL, CAR, re-marking, and scheduling
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
Congestion avoidance mechanisms, including WRED and tail drop
Traffic shaping
Configuration and Maintenance Console, Telnet, and SSH terminals
Network management protocols, such as SNMP v1/v2c/v3
File upload and download through FTP and TFTP
BootROM upgrade and remote upgrade
802.3az Energy Efficient Ethernet (EEE)
Hot patches
User operation logs
ZTP
Security and Management 802.1x authentication
Command line authority control based on user levels, preventing unauthorized users from using commands
DoS, ARP, and ICMP attack defenses
Port isolation, port security, and sticky MAC
Binding of the IP address, MAC address, interface number, and VLAN ID
Authentication methods, including AAA, RADIUS, and HWTACACS
Remote Network Monitoring (RMON)
Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm 442 mm x 420 mm x 43.6 mm 442 mm x 420 mm x 43.6 mm
Weight (fully loaded) 9.8 kg (21.6 lb) 8.7 kg (19.2 lb) 8.5 kg (18.7 lb)
Environmental Parameters Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 5% RH to 95% RH, non-condensing
Operating Voltage AC: 90V to 290V AC: 90V to 290V
DC: -38.4V to -72V
AC: 90V to 290V
DC: -38.4V to -72V
Maximum Power Consumption 394W 333W 258W

CE6860 Product Characteristics

Item CE6860-48S8CQ-EI
SFP28 Ports 48
QSFP28 Ports 8
Switching Capacity 4,000 Gbit/s
Forwarding Rate 3,000 Mpps
Airflow Design Front-to-back or back-to-front
Device Virtualization iStack: For details about the configuration, please see:
http://support.huawei.com/onlinetoolsweb/virtual/en/dc/stack_index.html?dcb
M-LAG
Network Virtualization TRILL
VXLAN routing and bridging
BGP-EVPN
QinQ access VXLAN
IPv6 over VXLAN
SDN Agile Controller
VMware NSX
Network Convergence FCoE
DCBX, PFC
Programmability OPS
CE modules for Ansible released on open source websites
Traffic Analysis NetStream
sFlow
VLAN Adding access, trunk, and hybrid interfaces to VLANs
Default VLAN
QinQ
MUX VLAN
GVRP
ACL Ingress: 2,750; Egress: 1,000
MAC Address Table Maximum: 136k
Dynamic learning and aging of MAC addresses
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
MAC address limiting based on ports and VLANs
ARP Maximum: 84k
ND Maximum: 32k
IPv4 FIB Maximum: 128k
IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
IPv6 FIB Maximum: 64k
IPv6 IPv6 Neighbor Discovery (ND)
Path MTU Discovery (PMTU)
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6
Multicast FIB Maximum: 8k
Multicast IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
IGMP snooping
IGMP proxy
Fast leave of multicast member interfaces
Multicast traffic suppression
Multicast VLAN
MPLS Multiprotocol label switching
Reliability LACP
STP, RSTP, VBST, and MSTP
BPDU protection, root protection, and loop protection
Smart Link and multi-instance
DLDP
ERPS (G.8032)
VRRP, VRRP load balancing, and BFD for VRRP
BFD for BGP/IS-IS/OSPF/Static route
QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
Actions of ACL, CAR, re-marking, and scheduling
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
Congestion avoidance mechanisms, including WRED and tail drop
Traffic shaping
Configuration and Maintenance Console, Telnet, and SSH terminals
Network management protocols, such as SNMP v1/v2c/v3
File upload and download through FTP and TFTP
BootROM upgrade and remote upgrade
802.3az Energy Efficient Ethernet (EEE)
Hot patches
User operation logs
ZTP
Security and Management 802.1x authentication
Command line authority control based on user levels, preventing unauthorized users from using commands
DoS, ARP, and ICMP attack defenses
Port isolation, port security, and sticky MAC
Binding of the IP address, MAC address, interface number, and VLAN ID
Authentication methods, including AAA, RADIUS, and HWTACACS
Remote Network Monitoring (RMON)
Dimensions (W x D x H) 442 mm x 420 mm x 43.6 mm
Weight (fully loaded) 8.8 kg (19.4 lb)
Environmental Parameters Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 5% RH to 95% RH, non-condensing
Operating Voltage AC: 90V to 290V
DC: -38.4V to -72V
Maximum Power Consumption 336W

CE6850 Product Characteristics

Item CE6850U CE6850
CE6850U-48S6Q-HI CE6855-48T6Q-HI CE6855-48S6Q-HI CE6851-48S6Q-HI CE6850-48T6Q-HI CE6850-48S6Q-HI CE6850-48S4Q-EI
10G Base-T Ports 0 48 0 0 48 0 0
SFP+ Ports 48 0 48 48 0 48 48
FC Ports 48 0 0 0 0 0 0
QSFP+ Ports 6 6 6 6 6 6 4
Switching Capacity 1.44 Tbit/s 1.28 Tbit/s
Forwarding Rate 1,080 Mpps 960 Mpps
Airflow Design Front-to-back or back-to-front
Device Virtualization iStack: For details about the configuration, please see:
http://support.huawei.com/onlinetoolsweb/virtual/en/dc/stack_index.html?dcb
Super Virtual Fabric (SVF): For details about the configuration, please see:
http://support.huawei.com/onlinetoolsweb/virtual/en/dc/svf_index.html?dcb
M-LAG
Network Virtualization TRILL
VXLAN routing and bridging (CE685xHI)
BGP-EVPN (CE685xHI)
QinQ access VXLAN (CE685xHI)
IPv6 over VXLAN (CE685xHI)
SDN Controller Agile Controller
VMware NSX
Network Convergence FCoE
DCBX, PFC, and ETS
Programmability OPS
CE modules for Ansible released on open source websites
Traffic Analysis NetStream
sFlow
VLAN Adding access, trunk, and hybrid interfaces to VLANs
Default VLAN
QinQ
MUX VLAN
GVRP
ACL Ingress: 3,750 Egress: 1,000 Ingress: 14,750 Egress: 1,000 Ingress: 14,750 Egress: 1,000 Ingress: 3,750 Egress: 1,000 Ingress: 3,750 Egress: 1,000 Ingress: 3,750 Egress: 1,000 Ingress: 2,250 Egress: 1,000
MAC Address Table Maximum: 288k Maximum: 288k Maximum: 288k Maximum: 288k Maximum: 288k Maximum: 288k Maximum: 128k
Dynamic learning and aging of MAC addresses
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
MAC address limiting based on ports and VLANs
ARP (maximum) 128k 128k 128k 128k 128k 128k 16k
ND (maximum) 48k 48k 48k 48k 48k 48k 4k
IPv4 FIB (maximum) 256k 256k 256k 256k 256k 256k 16k
IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+
IPv6 FIB (maximum) 128k 128k 128k 128k 128k 128k 8k
IPv6 IPv6 Neighbor Discovery (ND)
Path MTU Discovery (PMTU)
TCP6, ping IPv6, tracert IPv6, socket IPv6, UDP6, and Raw IP6
Multicast FIB (maximum) 8k 8k 8k 8k 8k 8k 4k
Multicast IGMP, PIM-SM, PIM-DM, MSDP, and MBGP
IGMP snooping
IGMP proxy
Fast leave of multicast member interfaces
Multicast traffic suppression
Multicast VLAN
MPLS MPLS (CE685xHI)
Reliability LACP
STP, RSTP, VBST, and MSTP
BPDU protection, root protection, and loop protection
Smart Link and multi-instance
DLDP
ERPS (G.8032)
VRRP, VRRP load balancing, and BFD for VRRP
BFD for BGP/IS-IS/OSPF/Static route
QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
Actions of ACL, CAR, re-marking, and scheduling
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
Congestion avoidance mechanisms, including WRED and tail drop
Traffic shaping
Configuration and Maintenance Console, Telnet, and SSH terminals
Network management protocols, such as SNMP v1/v2c/v3
File upload and download through FTP and TFTP
BootROM upgrade and remote upgrade
802.3az Energy Efficient Ethernet (EEE)
Hot patches
User operation logs
ZTP
Security and Management 802.1x authentication
Command line authority control based on user levels, preventing unauthorized users from using commands
DoS, ARP, and ICMP attack defenses
Port isolation, port security, and sticky MAC
Binding of the IP address, MAC address, interface number, and VLAN ID
Authentication methods, including AAA, RADIUS, and HWTACACS
Remote Network Monitoring (RMON)
Dimensions (W x D x H) 442 mm x 600 mm x 43.6 mm 442 mm x 600 mm x 43.6 mm 442 mm x 420 mm x 43.6 mm 442 mm x 600 mm x 43.6 mm
Weight (fully loaded) 12.6 kg (27.8 lb) 12.6 kg (27.8 lb) 8.7 kg (19.2 lb) 8.7 kg (19.2 lb) 12.6 kg (27.8 lb) 11.6 kg (25.6 lb) 11 kg (24.2 lb)
Environmental Parameters Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 5% RH to 95% RH, non-condensing
Operating Voltage AC: 90V to 290V
HDC: 240V (188V to 288V), 380V (188V to 400V)
AC: 220V
HDC: 240V (188V to 288V), 380V (188V to 400V)
AC: 90V to 290V
DC: -38.4V to -72V
AC: 90V to 290V
HDC: 240V (188V to 288V), 380V (188V to 400V)
AC: 90V to 290V
DC: -38.4V to -72V
Max. Power Consumption 339W 346W 216W 245W 379W 272W 272W

CE6810 Product Characteristics

Item CE6810LI
CE6810-48S4Q-LI CE6810-32T16S4Q-LI CE6810-24S2Q-LI
10G Base-T Ports 0 32 0
SFP+ Ports 48 16 24
QSFP+ Ports 4 4 2
Switching Capacity 1.28 Tbit/s 1.28 Tbit/s 640 Gbit/s
Forwarding Rate 960 Mpps 960 Mpps 480 Mpps
Airflow Design Front-to-back or back-to-front
Device Virtualization iStack: For details about the configuration, please see:
http://support.huawei.com/onlinetoolsweb/virtual/en/dc/stack_index.html?dcb
Super Virtual Fabric (SVF): For details about the configuration, please see:
http://support.huawei.com/onlinetoolsweb/virtual/en/dc/svf_index.html?dcb
M-LAG
Traffic Analysis NetStream
sFlow
VLAN Adding access, trunk, and hybrid interfaces to VLANs
Default VLAN
QinQ
MUX VLAN
GVRP
ACL Ingress: 1,250
Egress: 500
Ingress: 1,250
Egress: 500
Ingress: 1,250
Egress: 500
MAC Address Table Maximum: 128k Maximum: 128k Maximum: 128k
Dynamic learning and aging of MAC addresses
Static, dynamic, and blackhole MAC address entries
Packet filtering based on source MAC addresses
MAC address limiting based on ports and VLANs
ARP (maximum) 1.5k 1.5k 1.5k
IPv4 FIB (maximum) 1.5k 1.5k 1.5k
IP Routing IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS
Multicast IGMP snooping
MLD snooping
Reliability LACP
STP, RSTP, VBST, MSTP
BPDU protection, root protection, and loop protection
Smart Link and multi-instance
DLDP, LLDP
ERPS (G.8032)
VRRP, VRRP load balancing, and BFD for VRRP
QoS Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority
Actions of ACL, CAR, re-marking, and scheduling
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR
Congestion avoidance mechanisms, including WRED and tail drop
Traffic shaping
Configuration and Maintenance Console, Telnet, and SSH terminals
Network management protocols, such as SNMP v1/v2c/v3
File upload and download through FTP and TFTP
BootROM upgrade and remote upgrade
802.3az Energy Efficient Ethernet (EEE)
Hot patches
User operation logs
ZTP
Security and Management 802.1x authentication
Command line authority control based on user levels, preventing unauthorized users from using commands
DoS, ARP, and ICMP attack defenses
Port isolation, port security, and sticky MAC
Binding of the IP address, MAC address, interface number, and VLAN ID
Authentication methods, including AAA, RADIUS, and HWTACACS
Remote Network Monitoring (RMON)
Dimensions (W x D x H) 442 mm x 600 mm x 43.6 mm 442 mm x 420 mm x 43.6 mm 442 mm x 600 mm x 43.6 mm
Weight (fully loaded) 10.4 kg (22.9 lb) 8.5 kg (18.7 lb) 10.1 kg (22.3 lb)
Environmental Parameters Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m)
Storage temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 5% RH to 95% RH, non-condensing
Operating Voltage AC: 90V to 290V
DC: -38.4V to -72V
Max. Power Consumption 238W 288W 171W