This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

If you need help, please click here:


The pRRU5918 processes RF signals. It provides the following functions:

  • Modulates digital signals to a transmit frequency band, filters and amplifies these signals, and sends them to the antenna for transmission.
  • Receives RF signals from antennas, filters and amplifies these signals, down-converts the signals, converts them to digital signals, and sends them to the BBU/DCU for processing.
  • Transmits CPRI data over Ethernet cables.
  • Supports external antennas.
  • Supports PoE power supply.
  • Supports flexible configuration for multi-mode, multi-band operation.


Equipment Specifications Model
Frequency Bands 900 MHz + 1,800 MHz + 2,100 MHz + 2,600 MHz
Frequency Range 900 MHz: UL: 880 to 915 DL: 925 to 960
1,800 MHz: UL: 1,710 to 1,785 DL: 1,805 to 1,880
2,100 MHz: UL: 1,920 to 1,980 DL: 2,110 to 2,170
2,600 MHz: UL: 2,500 to 2,570 DL: 2,620 to 2,690
1,800 MHz: GSM, LTE FDD, LTE NB-IoT, GL, GM, LM, and GLM
2,100 MHz: UMTS, LTE FDD, LTE NB-IoT, UL, UM, LM, and ULM
2,600 MHz: LTE FDD
IBW 900 MHz: 35
1,800 MHz: 75
2,100 MHz: 60
2,600 MHz: 70
RF Specifications Model
TX/RX channels UMTS: 1T2R/1T1R
LTE FDD: 900 MHz: 1T1R/2T2R
1,800 MHz/2,100 MHz/2,600 MHz: 2T2R
Carrier Capacity GSM (RF input): 12 subbands (1T1R)
UMTS (RF input): 12 subbands (1T1R)
UMTS (BBU access): 8 carriers (1T1R/1T2R)
LTE NB-IoT (BBU access + RF input): 4 (carriers + subbands) (2T2R)
GSM + UMTS (RF input): 12 subbands (1T1R)
LTE FDD (BBU access + RF input): 12 (carriers + subbands) (1T1R/2T2R)

In GSM, up to four TRXs are supported per subband.
In UMTS, up to two carriers are supported per subband.
UMTS 1T2R consumes two subbands.
LTE FDD 1T1R is supported only on 900 MHz.
Output Power 900 MHz: 2 x 70 mW
1,800 MHz: 2 x 140 mW
2,100 MHz: 2 x 140 mW
2,600 MHz: 2 x 140 mW
UMTS Receiver Sensitivity with One Antenna -112 dBm
LTE FDD/LTE TDD Receiver Sensitivity with One Antenna -94 dBm
NB-IoT Receiver Sensitivity with One Antenna -119.3 dBm
Engineering Indicators Model
Power Supply PoE power supply: –48V DC
Dimensions (H x W x D) 290 mm x 210 mm x 70 mm
Weight ≤ 6 kg
Typical Power Consumption for an RRU Typical power consumption (50% Load): 57
Maximum average power consumption (100% Load): 62
Operating Temperature With sunlight exposure of 1,120 W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C

At a temperature from –40°C to –20°C, the pRRU can work without fulfilling performance requirements. At a temperature from –20°C to +55°C, the pRRU can fulfill the performance requirements.
Protection Rating IP65
Relative Humidity 5% RH to 95% RH
Air Pressure 70 kPa to 106 kPa
Surge Protection Specifications Differential mode: 0.5 kV (1.2/50 μs)
Common mode: 1.0 kA (8/20 μs) for grounding a pair of PGND cables 3.0 kA (8/20 μs) for grounding eight PGND cables
CPRI Specifications Model
Number of CPRI Ports RJ45: 1
CPRI Data Rate RJ45: 10.1 Gbit/s
Topology RJ45: Star topology
Maximum Distance RJ45: At least CAT6a S/FTP shielded Ethernet cables are used. The maximum Ethernet cable length is 100 meters and can be extended to 200 meters through a 10.1 Gbit/s extender.

For Partners

If you are already a Partner, please click here to get more marketing resources.
Click here to visit the Partner zone to check enquiry status, manage orders, get support, or learn more about Huawei Partners.

Share link to: