Пошук
  • 300s banner pc

    OceanDisk 300S SAS 3.0 Series SSD

    The Recommended Choice for Enterprise SSDs in Data Centers

Overview

  • Overview
  • Features
  • Specifications
  • Resources

OceanDisk 300S SAS 3.0 Series SSD

Huawei OceanDisk 300S is an enterprise-grade SAS SSD that features high performance, low latency, and high reliability, greatly boosting storage I/O performance. This product is compatible with mainstream operating systems (OSs) and virtualization systems. It enhances service performance across databases, Virtual Desktop Infrastructure (VDI), and High-Performance Computing (HPC) while slashing system TCO.

high performance

High Performance

• Max. read and write bandwidths: 2.1 GB/s and 2 GB/s
• Max. read and write IOPS: 400k and 150k

High Reliability

High Reliability

• FSP and LDPC algorithms
• Dynamic RAID
• E2E data protection
• Intelligent multi-stream + Intelligent recycling
• Health Indicator Feature

Intelligence on Demand

Easy O&M

• Firmware activation in seconds
• I/O-related service function statistics
• One-click repair

Specifications

Model OceanDisk 300S SAS 3.0 SSD
Form Factor U.2 2.5-inch
Interface, Protocol SAS 3.0
NAND Flash 3D TLC
Available Capacity 480 GB 960 GB 1,920 GB 3,840 GB 7,680 GB 3,200 GB
Single-Port Sequential
Read/Write Bandwidth@128 KB
900/350 MB/s 1,000/950 MB/s 1,000/1,000 MB/s 1,000/1,000 MB/s 1,000/1,000 MB/s 1,000/1,000 MB/s
Single-Port Random
Read/Write IOPS@4 KB
160,000/16,000 200,000/40,000 200,000/70,000 200,000/70,000 200,000/100,000 200,000/150,000
Single-Port Average
Read/Write Latency@1 QD
118/38 µs 118/38 µs 118/38 µs 118/38 µs 118/38 µs 118/38 µs
Dual-Port Sequential
Read/Write Bandwidth@128 KB
900/350 MB/s 1,600/1,000 MB/s 2,100/1,800 MB/s 2,100/1,800 MB/s 2,100/1,800 MB/s 2,100/2,000 MB/s
Dual-Port Random
Read/Write IOPS@4 KB
160,000/16,000 360,000/40,000 400,000/70,000 400,000/70,000 400,000/100,000 400,000/150,000
Dual-Port Average
Read/Write Latency@1 QD
118/38 µs 118/38 µs 118/38 µs 118/38 µs 118/38 µs 118/38 µs
Endurance1 1 DWPD, 5 years 1 DWPD, 5 years 1 DWPD, 5 years 1 DWPD, 5 years 1 DWPD, 5 years 3 DWPD, 5 years
Max. Data Written2 0.876 PB 1.752 PB 3.504 PB 7.008 PB 14.016 PB 17.52 PB
Weight (g) <200 g
Average Power Consumption (Idle, Active) 5 W (idle); 11 W (active)
Reliability Meantime between failures (MTBF): 2.5 million hours
Annual failure rate (AFR): ≤ 0.35%
Uncorrectable bit error rate (UBER): 10-18
Temperature Non-operational: –40ºC to 85ºC (–40°F to 185ºF)
Operational: 0ºC to 83ºC(32ºF to 181.4ºF)
TRIM Supported
Power Failure Protection Supported
Chip Failure Protection Supported
Certifications China: RoHS;Europe: WEEE、RoHS、REACH、CE;
Northern America: NRTL;Canada: IC;Japan: VCCI;Australia: RCM
Member States of IEEE: CB;UK: UKCA

1 DWPD represents drive writes per day tested according to the JESD219 standards. An SSD can be used for five years if the DWPD stays below the specified value; otherwise, the SSD service life will be affected.

2 Max. Data Written: measured by petabyte writes (PBW). The DWPD is tested with 4 KB I/O size and alignment.

Resources

TOP