R240D & R230D Product Description

R240D/R230D Product Description

Product appearance

Appearance

R240D

R230D

Interfaces

R240D

1. ETH0 to 3: 10M/100M port used to connect to the wired Ethernet

2. Phone: phone interface connects to a POTS phone or modem device

3. GE/PoE: 10M/100M/1,000M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for RUs

4. Phone: phone interface connects to a traditional PSTN

5. Default: reset button used to restore factory settings if you hold down the button for more than 3 seconds

6. Power input interface: 12V DC

R230D

1. ETH/PoE: 10/100M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for RUs

2. Default: reset button used to restore factory settings if you hold down the button for more than 3 seconds

LED indicators

Type Color Status Description
Default Status after Power-on Green Steady on The AP is just powered on and the software is not started yet.
Software Startup Status Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green.
Running Status Green Blinking once every 2s (0.5 Hz)

The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP.
The system enters the Uboot CLI.

Blinking once every 5s (0.2 Hz) The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP.
Alarm Green Blinking once Alarm Green every 0.25s (4 Hz)

The software is being upgraded.
After the software is uploaded and started, the AP working in Fit AP mode requests to go online on the AC and maintains this state until it goes online successfully on the AC (before the CAPWAP link is established).
The AP registration fails (the CAPWAP link is disconnected).

Fault Red Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.

Product characteristics

WLAN features

Network features

QoS features

Security features

Maintenance features

BYOD

Spectrum analysis

Product specifications

Item R240D R230D
Physical Specifications Dimensions (H x W x D) 41.5 mm x 140 mm x 86 mm
26 mm x 120 mm x 86 mm
Weight
0.2 kg
0.1 kg
Power Specifications Power input

PoE power supply in compliance with IEEE 802.3af/at

Adapter power supply: 12V ± 10%, 16V MAX, 2.1 mm DC JACK

PoE power supply in compliance with IEEE 802.3af/at

Environmental Specifications Operating temperature

0°C to 40°C

0°C to 40°C

Storage temperature –40°C to 70°C
–40°C to 70°C
Operating humidity 5% to 95% (non-condensing) 5% to 95% (non-condensing)
Altitude –60m to 5,000m –60m to 5,000m
Operating atmospheric pressure 70 kPa to 106 kPa 70 kPa to 106 kPa

Radio Specifications

Item R240D R230D
Antenna Type Built-in antennas Built-in antennas
Antenna Gain

2.4G: 2 dBi
5G: 3 dBi

2.4G: 3 dBi
5G: 4 dBi

Maximum Number of Users 256 256
Maximum Transmit Power

21 dBm (combined power)*

*: The actual transmit power varies according to local laws and regulations

20 dBm (combined power)*

*: The actual transmit power varies according to local laws and regulations

Power Increment 1 dBm 1 dBm
Receiver Sensitivity 2.4 GHz 802.11b (CCK): -101 dBm @ 1 Mbit/s; -90 dBm @ 11 Mbit/s 2.4 GHz 802.11b (CCK): -101 dBm @ 1 Mbit/s; -90 dBm @ 11 Mbit/s
2.4 GHz 802.11g (non-HT20): -95 dBm @ 6 Mbit/s; -79 dBm @ 54 Mbit/s 2.4 GHz 802.11g (non-HT20): -95 dBm @ 6 Mbit/s; -79 dBm @ 54 Mbit/s
2.4 GHz 802.11n (HT20): -95 dBm @ MCS0; -77 dBm @ MCS7 2.4 GHz 802.11n (HT20): -95 dBm @ MCS0; -77 dBm @ MCS7
2.4 GHz 802.11n (HT40): -93 dBm @ MCS0; -74 dBm @ MCS7 2.4 GHz 802.11n (HT40): -93 dBm @ MCS0; -74 dBm @ MCS7
5 GHz 802.11a (non-HT20): -94 dBm @ 6 Mbit/s; -78 dBm @ 54 Mbit/s 5 GHz 802.11a (non-HT20): -94 dBm @ 6 Mbit/s; -78 dBm @ 54 Mbit/s
5 GHz 802.11n (HT20): -94 dBm @ MCS0; -76 dBm @ MCS7 5 GHz 802.11n (HT20): -94 dBm @ MCS0; -76 dBm @ MCS7
5 GHz 802.11n (HT40): -91 dBm @ MCS0; -73 dBm @ MCS7 5 GHz 802.11n (HT40): -91 dBm @ MCS0; -73 dBm @ MCS7
5 GHz 802.11ac (VTH20): -95 dBm @ MCS0NSS1; -71 dBm @ MCS8NSS1 5 GHz 802.11ac (VTH20): -95 dBm @ MCS0NSS1; -71 dBm @ MCS8NSS1
5 GHz 802.11ac (VTH40): -91 dBm @ MCS0NSS1; -66 dBm @ MCS9NSS1 5 GHz 802.11ac (VTH40): -91 dBm @ MCS0NSS1; -66 dBm @ MCS9NSS1
5 GHz 802.11ac (VTH80): -88 dBm @ MCS0NSS1; -63 dBm @ MCS9NSS1 5 GHz 802.11ac (VTH80): -88 dBm @ MCS0NSS1; -63 dBm @ MCS9NSS1

Networking and applications

As shown in the figure, the downlink GE interfaces of the central AP support PoE power supply and can be directly connected to RUs. The central AP can connect to more RUs through a PoE switch. RUs are deployed indoors and communicate with the central AP through network cables.

For more information, visit http://e.huawei.com/en or contact your local Huawei sales office.