AP2050DN-E Access Point

AP2050DN-E

Huawei AP2050DN-E is a wall plate Access Point (AP) that complies with 802.11ac Wave 2. It supports 2 x 2 MIMO and two spatial streams that deliver a rate of 1.267 Gbit/s. The AP2050DN-E is used mainly in environments with densely located small rooms, such as hotel guest rooms, student dormitories, hospital wards, and small offices. The AP's built-in Bluetooth module works with eSight to locate Bluetooth devices.

View Full Specs View 3D Model

Wide Variety of Interfaces

One GE uplink port, four GE downlink ports, and two RJ45 pass-through phone ports (compatible with RJ11). Built-in Bluetooth works with eSight to locate Bluetooth devices and PoE OUT supplies power for STAs such as IP phones.
Flexible Installation

Easy to install: Ceiling-mounted, wall-mounted, plate-mounted, and desk-mounted methods.
Simple Cloud Management

Simple management and O&M for APs and services on Huawei’s cloud management platform save network O&M costs.

Specifications¹

Specifications	AP2050DN-E
Dimensions (H x W x D)	36 mm x 140 mm x 86 mm
Power Input	48V DC ±5% PoE power supply: Complies with IEEE 802.3af/at
Maximum Power Consumption	11.5W Note: Maximum power consumption depends on local laws and regulations
Operating Temperature	0°C to 40°C
Antenna Type	Built-in omnidirectional antenna
Maximum Number of Users	≤ 256
Maximum Transmit Power	2.4G: 21 dBm (combined power) 5G: 20 dBm (combined power) Notes: Transmit power depends on local laws and regulations. The AP2050DN-E is used only in countries and regions that support 86-type boxes
MIMO: Spatial Streams	2 x 2:2
Radio Protocols	802.11a/b/g/n/ac/ac Wave 2
Maximum Rate	1.267 Gbit/s

1. This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.

Login

AP2050DN-E Access Point

AP2050DN-E Access Point

Specifications¹

Dokumentation

Technical Support

Let’s Talk

For Partners