This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Si necesita ayuda, haga clic aquí:

pRRU5928

The pRRU5928 processes RF signals. It provides the following functions:

  • Modulates digital signals to a transmit frequency band, filters and amplifies these signals, and sends them to the antenna for transmission.
  • Receives RF signals from antennas, filters and amplifies these signals, down-converts the signals, converts them to digital signals, and sends them to the BBU/DCU for processing.
  • Transmits CPRI data over optical fibers or Ethernet cables.
  • Supports external antennas.
  • Supports DC and PoE power supply.
  • Supports flexible configuration for multi-mode multi-band operation.
Huawei

Specifications


Equipment Specifications Model
Frequency Bands 850 MHz + PCS + AWS + 2,600 MHz
Frequency Range 850 MHz: UL: 824 to 849 DL: 869 to 894
PCS: UL: 1,850 MHz to 1,910 MHz DL: 1,930 MHz to 1,990 MHz
AWS: UL: 1,710 MHz to 1,780 MHz DL: 2,110 MHz to 2,180 MHz
2,600 MHz: UL: 2,500 to 2,570 DL: 2,620 to 2,690
Mode 850 MHz: UMTS, LTE FDD, LTE NB-IoT, UL, UM, LM, and ULM
PCS: UMTS, LTE FDD, LTE NB-IoT, UL, UM, LM, and ULM
AWS: UMTS, LTE FDD, LTE NB-IoT, UL, UM, LM, and ULM
2,600 MHz: LTE FDD
IBW 850 MHz: 25
PCS: 60
AWS: 70
2,600 MHz: 70
RF Specifications Model
TX/RX channels LTE NB-IoT: 2T2R
LTE FDD: PCS/AWS/2,600 MHz: 2T2R
850 MHz: 1T1R/2T2R
UMTS: 1T1R/1T2R
Carrier Capacity UMTS (BBU access): 8 carriers (1T1R/1T2R)
LTE NB-IoT (BBU access + RF input): 4 (carriers + subbands) (2T2R)
LTE FDD (BBU access + RF input): 12 (carriers + subbands) (1T1R/2T2R)
UMTS (RF input): 12 subbands (1T1R)

NOTE:
In UMTS, up to two carriers are supported per subband.
UMTS 1T2R consumes two subbands.
LTE FDD 1T1R is supported only on 850 MHz.
Output Power 850 MHz: 2 x 70 mW
PCS: 2 x 175 mW
AWS: 2 x 175 mW
2,600 MHz: 2 x 175 mW
UMTS Receiver Sensitivity with One Antenna -112 dBm
LTE FDD/LTE TDD Receiver Sensitivity with One Antenna -94 dBm
NB-IoT Receiver Sensitivity with One Antenna -119.3 dBm
Engineering Indicators Model
Power Supply PoE power supply: –48V DC
Dimensions (H x W x D) 290 mm x 210 mm x 87 mm
Weight ≤ 7 kg
Typical Power Consumption for an RRU Typical Power Consumption (50% Load): 71
Maximum Average Power Consumption (100% Load): 75
Operating Temperature With sunlight exposure of 1,120 W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C

NOTE:
At a temperature from –40°C to –20°C, the pRRU can work without fulfilling performance requirements. At a temperature from –20°C to +55°C, the pRRU can fulfill the performance requirements.
Protection Rating IP65
Relative Humidity 5% RH to 95% RH
Air Pressure 70 kPa to 106 kPa
Surge Protection Specifications Differential mode: 0.5 kV (1.2/50 μs)
Common mode: 1.0 kA (8/20 μs) for grounding a pair of PGND cables 3.0 kA (8/20 μs) for grounding eight PGND cables
CPRI Specifications Model
Number of CPRI Ports RJ45: 1
SFP: 1
CPRI Data Rate RJ45: 10.1 Gbit/s
SFP: 10.1 Gbit/s
Topology RJ45: Star topology
SFP: Star topology
Maximum Distance RJ45: At least CAT6a S/FTP shielded Ethernet cables are used. The maximum Ethernet cable length is 100 meters and can be extended to 200 meters through a 10.1 Gbit/s extender.
SFP: The maximum distance between a pRRU and an RHUB is 200 meters if a 1.5 square-millimeter optical/electrical hybrid cable is used.

Para nuestros socios

Si ya es un socio, haga clic aquí para obtener más recursos de marketing.
Si desea conocer el estado de una solicitud, gestionar una orden, obtener asistencia y conocer más sobre los socios de Huawei, haga clic aquí y visite la zona de socios.