This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Si necesita ayuda, haga clic aquí:

hRRU5901

The hRRU5901 processes RF signals. It provides the following functions:

  • Modulates digital signals to a transmit frequency band, filters and amplifies these signals, and sends them to the antenna for transmission.
  • Receives RF signals from antennas, filters and amplifies these signals, down-converts the signals, converts them to digital signals, and sends them to the DCU for processing.
Huawei

Specifications


Parameters Model 1 Model 2 Model 3 Model 4 Model 5 Model 6 Model 7 Model 8
Frequency Band 700 MHz
800 MHz
850 MHz
900 MHz
1,800 MHz
2,100 MHz
2,300 MHz
2,600 MHz
Frequency Range UL: 703–748 MHz
DL: 758–803 MHz
UL: 832–862 MHz
DL: 791–821 MHz
UL: 814–849 MHz
DL: 859–894 MHz
UL: 880–915 MHz
DL: 925–960 MHz
UL: 1,710–1,785 MHz
DL: 1,805–1,880 MHz
UL: 1,920–1,980 MHz
DL: 2,110–2,170 MHz
UL: 2,300–2,400 MHz
DL: 2,300–2,400 MHz
UL: 2,500–2,570 MHz
DL: 2,620–2,690 MHz
Mode LTE FDD LTE FDD UMTS, LTE FDD, and UL GSM, UMTS, LTE FDD, GU, GL, UL, and GUL GSM, LTE FDD, and GL UMTS, LTE FDD, and UL LTE TDD LTE FDD
IBW 45 MHz
30 MHz
35 MHz
35 MHz
75 MHz
60 MHz
100 MHz
70 MHz
Parameters Model 1 Model 2 Model 3 Model 4 Model 5 Model 6 Model 7 Model 8
TX/RX channels 700 MHz: 4T4R 800 MHz: 2T2R 850 MHz: 2T2R 900 MHz: 2T2R 1,800 MHz: 2T2R 2,100 MHz: 2T2R 2,300 MHz: 6T6R 2,600 MHz: 2T2R
Carrier Capacity LTE FDD (1T1R/2T2R)(BBU access + RF input): 6 (carriers + subbands) LTE FDD (1T1R/2T2R)(BBU access + RF input): 6 (carriers + subbands) UMTS (1T1R/1T2R)(BBU access + RF input):
5 (carriers + subbands)
NOTE:
In UMTS, up to two carriers are supported per subband.

LTE FDD (1T1R/2T2R) (BBU access + RF input): 6 (carriers + subbands)
UL (BBU access + RF input): ≤ 8 (carriers + subbands). The capacity specifications of each mode do not exceed the maximum specifications of the individual mode.
GSM (1T1R) (RF input):
4 subbands
NOTE:
In GSM, up to four TRXs are supported per subband.

UMTS (1T1R/1T2R) (BBU access + RF input):
6 (carriers + subbands)
NOTE:
In UMTS, up to two carriers are supported per subband.

LTE FDD (1T1R/2T2R) (BBU access + RF input): 6 (carriers + subbands)
GUL(BBU access + RF input): GU/UL/GUL total capacity ≤ 8 (carriers + subbands). The capacity specifications of each mode do not exceed the maximum specifications of the individual mode.
GSM (1T1R) (RF input):
6 subbands
NOTE:
In GSM, up to four TRXs are supported per subband.

LTE FDD (1T1R/2T2R) (BBU access+RF input): 8 (carriers + subbands)
GL(BBU access + RF input):
6 GSM subbands + 5 LTE (carriers + subbands)
4 GSM subbands + 6 LTE (carriers + subbands)
2 GSM subbands + 7 LTE (carriers + subbands)
NOTE:
A single channel supports a maximum of eight carriers and subbands.
UMTS (1T1R/1T2R) (BBU access + RF input):
8 (carriers + subbands)/6 carriers + 4 subbands
NOTE:
In UMTS, up to two carriers are supported per subband.

LTE FDD (1T1R/2T2R) (BBU access + RF input): 8 (carriers + subbands)
UL (BBU access + RF input): ≤ 8 (carriers + subbands). The capacity specifications of each mode do not exceed the maximum specifications of the individual mode.
LTE TDD (2T2R) (BBU access + RF input): 6 (carriers + subbands) LTE FDD (1T1R/2T2R) (BBU access + RF input): 6 (carriers + subbands)
Output Power 700 MHz: 4W x 20W 800 MHz: 2W x 20W 850 MHz: 2W x 20W 900 MHz: 2W x 20W 1,800 MHz: 2W x 40W 2,100 MHz: 2W x 40W 2,300 MHz: 6W x 40W 2,600 MHz: 2W x 40W
UMTS Receiver Sensitivity with One Antenna - - -112 dBm -112 dBm - -112 dBm - -
LTE FDD/LTE TDD Receiver Sensitivity with One Antenna -94 dBm
NB-IoT Receiver Sensitivity with One Antenna (dBm) -
Parameters Model 1 Model 2 Model 3 Model 4 Model 5 Model 6 Model 7 Model 8
Power Supply -48V DC (-36V to -57V DC)
Dimensions (H x W x D) 400 mm x 300 mm x 150 mm (without the housing) 400 mm x 300 mm x 100 mm 480 mm x 356 mm x 140 mm (without the housing) 400 mm x 300 mm x 100 mm
Weight 22 kg (without the housing) 15 kg 25 kg (without the housing) 15 kg
Typical Power Consumption for an RRU Typical power consumption: 380, Maximum power consumption: 430 Typical power consumption: 220, Maximum power consumption: 260 Typical power consumption: 240, Maximum power consumption: 280 Typical power consumption: 220, Maximum power consumption: 260 Typical power consumption: 320, Maximum power consumption: 360 Typical power consumption: 300, Maximum power consumption: 350 Typical power consumption: 1,000, Maximum power consumption: 1,100 Typical power consumption: 320, Maximum power consumption: 360
Operating Temperature With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
With sunlight exposure of 1,120W/m2: –40°C to +50°C
Without sunlight exposure: –40°C to +55°C
NOTE:
Depending on the installation scenario, traffic load, and carrier configuration, the output power of the hRRU may temporarily decrease when it works within the range of 10°C higher than the allowed highest temperature.
Protection Rating IP65
Relative Humidity 5% RH to 100% RH
Air Pressure 70 kPa to 106 kPa
Surge Protection Specifications Common mode: 20 kA
Parameters Model 1 Model 2 Model 3 Model 4 Model 5 Model 6 Model 7 Model 8
Number of CPRI Ports 2
CPRI Data Rate 10.1 Gbit/s
Topology Star or Chain topology
Maximum Distance The distance is 2 kilometers by default but can be extended to 15 kilometers if the radius of the source cell is modified.

Para nuestros socios

Si ya es un socio, haga clic aquí para obtener más recursos de marketing.
Si desea conocer el estado de una solicitud, gestionar una orden, obtener asistencia y conocer más sobre los socios de Huawei, haga clic aquí y visite la zona de socios.