This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Si necesita ayuda, haga clic aquí:

pRRU5921

The pRRU5921 processes RF signals. It provides the following functions:

  • Modulates baseband signals to a transmit frequency band, filters and amplifies these signals, and sends them to the antenna for transmission.
  • Receives RF signals from antennas, filters and amplifies these signals, down-converts the signals, converts them to digital, and sends them to the BBU for processing.
  • Transmits CPRI data over Ethernet cables or optical fibers.
  • Uses internal antennas.
  • Supports PoE and DC power supply.
  • Supports flexible configuration for multi-mode multi-band operation.
Huawei

Specifications


Equipment Specifications Model
Frequency Bands 900 MHz + 1,800 MHz + 2,100 MHz + 2,300 MHz
Frequency Range 900 MHz: UL: 880 to 915 DL: 925 to 960
1,800 MHz: UL: 1,710 to 1,785 DL: 1,805 to 1,880
2,100 MHz: UL: 1,920 to 1,980 DL: 2,110 to 2,170
2,300 MHz: UL: 2,300 to 2,390 DL: 2,300 to 2,390
Models 900 MHz: GSM, UMTS, LTE FDD, LTE NB-IoT, GU, GL, GM, UL, UM, LM, GUL, GUM, GLM, ULM, and GULM
1,800 MHz: GSM, LTE FDD, LTE NB-IoT, GL, GM, LM, and GLM
2,100 MHz: UMTS, LTE FDD, LTE NB-IoT, UM, UL, LM, and ULM
2,300 MHz: LTE TDD
IBW 900 MHz: 20
1,800 MHz: 22.5
2,100 MHz: 20
2,300 MHz: 60
RF Specifications Model
TX/RX Channels LTE NB-IoT: 2T2R
LTE TDD: 2T2R
UMTS: 1T1R/1T2R
GSM: 1T1R
LTE FDD: 2T2R
Carrier Capacity GSM (RF input) + UMTS + LTE NB-IoT:
2 GSM subbands + 4 UMTS carriers + 1 LTE NB-IoT carrier
GSM (RF input) + UMTS:
2 GSM subbands + 4 UMTS carriers
UMTS:
4 carriers
GSM (RF input) + LTE FDD + LTE TDD:
2 GSM subbands + 3 LTE FDD carriers + 3 LTE TDD carriers
GSM (RF input) + LTE NB-IoT:
2 GSM subbands + 1 LTE NB-IoT carrier
UMTS + LTE FDD + LTE TDD:
4 UMTS carriers + 3 LTE FDD carriers + 3 LTE TDD carriers
UMTS + LTE FDD + LTE TDD + LTE NB-IoT:
4 UMTS carriers + 2 LTE FDD carriers + 3 LTE TDD carriers + 1 LTE NB-IoT carrier
LTE NB-IoT:
1 carrier
UMTS + LTE NB-IoT:
4 UMTS carriers + 1 LTE NB-IoT carrier
LTE FDD + LTE TDD + LTE NB-IoT:
2 LTE FDD carriers + 3 LTE TDD carriers + 1 LTE NB-IoT carrier
LTE TDD:
3 carriers
GSM (RF input) + UMTS + LTE FDD + LTE TDD:
2 GSM subbands + 4 UMTS carriers + 3 LTE FDD carriers + 3 LTE TDD carriers
GSM (RF input) + LTE FDD + LTE TDD + LTE NB-IoT:
2 GSM subbands + 2 LTE FDD carriers + 3 LTE TDD carriers + 1 LTE NB-IoT carrier
GSM (RF input):
2 subbands (4 carriers on each subband)
GSM (RF input) + UMTS + LTE FDD + LTE TDD + LTE NB-IoT:
2 GSM subbands + 4 UMTS carriers + 2 LTE FDD carriers + 3 LTE TDD carriers + 1 LTE NB-IoT carrier
LTE FDD:
3 carriers
Output Power 900 MHz: 2 x 100 mW
1,800 MHz: 2 x 250 mW
2,100 MHz: 2 x 250 mW
2,300 MHz: 2 x 250 mW
UMTS Receiver Sensitivity with One Antenna -112 dBm
LTE FDD/LTE TDD Receiver Sensitivity with One Antenna -94 dBm
NB-IoT Receiver Sensitivity with One Antenna -119.3 dBm
Built-in Antenna Specifications Model
Gain 900: 1.5 dBi
1,800: 3 dBi
2,100: 3 dBi
2,300: 3 dBi
Polarization Mode 900: Linear
1,800: Linear
2,100: Linear
2,300: Linear
Directionality 900: Omnidirectional
1,800: Omnidirectional
2,100: Omnidirectional
2,300: Omnidirectional
Engineering Indicators Model
Power Supply PoE/DC power supply: –48V DC
Dimensions (H x W x D) 200 mm x 200 mm x 58 mm
Weight ≤ 2.5 kg
Typical Power Consumption for an RRU Typical Power Consumption (50% Load): 55
Maximum Average Power Consumption (100% Load): 65
Operating Temperature –5°C to +40°C
Protection Rating IP20
Relative Humidity 5% RH to 95% RH
Air Pressure 70 kPa to 106 kPa
Surge Protection Specifications Differential mode: 0.5 kV (1.2/50 μs)
Common mode: 2 kV (1.2/50 μs)
CPRI Specifications Model
Number of CPRI Ports RJ45: 1
SFP: 1
CPRI Data Rate (Gbit/s) RJ45: 10.1
SFP: 10.1
Topology RJ45: Star topology
SFP: Star topology
Maximum Distance RJ45: At least CAT6a S/FTP shielded Ethernet cables are used. The maximum Ethernet cable length is 100 meters and can be extended to 200 meters through a 10.1 Gbit/s extender.
SFP: The maximum distance between a pRRU and an RHUB is 200 meters if a 1.5 square-millimeter optical/electrical hybrid cable is used.

For Partners

Si ya es un socio, haga clic aquí para obtener más recursos de marketing.
Si desea conocer el estado de una solicitud, gestionar una orden, obtener asistencia y conocer más sobre los socios de Huawei, haga clic aquí y visite la zona de socios.