OceanDisk 300P PCIe 4.0 Series SSD
The Recommended Choice for Enterprise SSDs in Data Centers
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Produits, solutions et services pour les entreprises
High Performance
High Reliability
Easy O&M
Specifications
Model | Huawei OceanDisk 300P PCIe 4.0 SSD | ||||
Form Factor | U.2 2.5-inch | ||||
Interface | PCIe 4.0 @ U.2 | ||||
NVMe Protocol | NVMe 2.0 | ||||
NAND Flash | 3D TLC | ||||
Available Capacity | 3.2 TB | 3.84 TB | 6.4 TB | 7.68 TB | 15.36 TB |
Sequential Read/Write Bandwidth @ 128KB | 7,500/7,000 MB/s | ||||
Random Read/Write IOPS @ 4KB | 1,800/700 k | 1,800/350 k | 1,800/900 k | 1,800/400 k | 1,800/450 k |
Average Read/Write Latency @ 1QD | 60/8 µs | 60/8 µs | 60/8 µs | 60/9 µs | 60/9 µs |
Endurance1 | 3 DWPD, 5 years | 1 DWPD, 5 years | 3 DWPD, 5 years | 1 DWPD, 5 years | 1 DWPD, 5 years |
Max. Data Written2 | 17.52 PBW | 7.008 PBW | 35.04 PBW | 14.016 PBW | 28.032 PBW |
Weight (g) | <200 g | ||||
Average Power Consumption (Idle, Active) | <5 W (Idle), 15 W (Active) | ||||
Reliability | Meantime between failures (MTBF): 2.5 million hours Annual failure rate (AFR): ≤ 0.35% Uncorrectable bit error rate (UBER): 10-18 |
||||
Temperature | Non-operational: –40ºC to 85ºC (–40°F to 185ºF) Operational: 0ºC to 83ºC(32ºF to 181.4ºF) |
||||
TRIM | Supported | ||||
Power Failure Protection | Supported | ||||
Chip Failure Protection | Supported | ||||
Certifications | China: RoHS; Europe: WEEE & RoHS & REACH & CE; Northern America: NRTL; Canada: IC; Japan: VCCI; Australia: RCM; Member States of IEEE: CB; UK: UKCA |
1 The DWPD is tested according to the JESD219 standard. An SSD can be used for five years if the DWDP stays below the specified vale. Otherwise, the SDD service life will be affected.
2 Max. Data Written: measured by petabyte writes (PBW).