This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Recherche
  • optixaccess ea5801e gp04 banner pc 01

    Huawei OptiXaccess EA5801E-GP04

    Compact and Low-density Box-shaped OLT.

Overview

  • Overview
  • Features
  • Specifications
End-to-end Networking

Lightweight and small size

The lightweight OLT weighs less than 5 kg and occupies 1 U installation space. It can be flexibly adapted to various scenarios

Continuous Security

Dual power supplies, high reliability

Supports dual AC power supplies, providing high reliability

Flexible Installation

Easy installation and flexible deployment

The matching small outdoor cabinet can be installed on a pole, tower, or wall, facilitating installation and reducing engineering costs

Specifications

Parameters Huawei OptiXaccess EA5801E-GP04
Dimensions (W x D x H) (mm) Excluding mounting ears: 442 x 220 x 43.6
Including IEC mounting ears: 482.6 x 220 x 43.6
Including ETSI mounting ears: 535 x 220 x 43.6
Maximum fully-loaded weight (DC) 5kg
Power supply mode AC power supply (dual backup)
Working voltage range AC power supply: 100–240 V
Rated voltage AC power supply: 110 V/220 V
Maximum input current AC power supply: 2.5 A
Ambient temperature –40°C to +65°C
The device can start up at a lowest temperature of –25°C.

NOTE
The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack.
Ambient humidity 5%–95% RH
Atmospheric pressure 70–106 kPa
Altitude < 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude.
System switching capacity 95 Gbit/s
MAC addresses 32768
Access ONT 256
IPv4 routing table 8192
IPv6 routing table 4096
ARP table 16384
Bit error rate (BER) in full load A BER smaller than 10 e-10 for a port that transmits data in full load
10GE/GE upstream ports 4
Service ports 4 GPON
Power consumption AC power supply:
• Static Power Consumption: 47 W
• Typical Power Consumption: 58 W
• Maximum Power Consumption: 100 W

NOTE
The power consumption of a product is tested in the following conditions:
• Static power consumption: 25°C, no optical module in optical ports, and no service.
• Typical power consumption: 25°C, 4 x 10GE(10kM) upstream ports, 4 x GPON(CLASS C+) ports on the user side, full services, and maximum traffic.
• Maximum power consumption: 65°C, 4 x 10GE(10kM) upstream ports, 4 x GPON(CLASS C+) ports on the user side, full services, and maximum traffic.

TOP