This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>

Need Help?

Radio Frequency (RF) Coaxial Connectors

RF coaxial connectors enable you to extend or customize the length of RF connecting lines on site when you need lines different from standard configurations, saving you time and expenses for your WLAN construction. The connectors can be used with Huawei AP6510DN/AP6610DN/AP6310SN access points.

For example, if 7m connecting lines are required, you can use an RF coaxial connector to connect a 2m and a 5m RF connecting line. Each coaxial cable must be configured with two RF coaxial connectors; models are based on a site survey. For details about the model selections, contact Huawei network planning engineers who will be glad to assist.

Extend or customize RF coaxial cables on site with Huawei RF coaxial connectors

  • An RF coaxial connector can connect two coaxial cables, a coaxial cable and a microstrip, and a coaxial cable and a waveguide antenna
  • Extend or customize the length of RF connecting lines on site, and save time and expenses when constructing your WLAN
  • When you need lines other than standard configurations, a plug is installed on the cable terminal, and a socket on the device

Specifications¹

Model

A0RFCON04

GM-ANT FED-1/2

Type

N

N

Impedance

50 ohm

50 ohm

Structure

Straight

Straight

Connection Properties

Female

Male

Installation Form

With a cable connected to a Type N connector

With a 1/2 inch feeder

Standing-Wave Ratio

≤ 1.3

≤ 1.15

1. This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.

WORLDWIDE

Huawei Enterprise APP

Copyright © 2018 Huawei Technologies Co., Ltd. All rights reserved.