Amennyiben segítségre van szüksége, kattintson ide:

Embedded Power & Module

Huawei’s Embedded Power & Module provides stable –48 V DC power for wireless and fixed access networks, transmission networks, and enterprise network equipment. It can be deployed independently or embedded into power cabinets, and consists of a power distribution unit, rectifiers, and a controller.

Every unit is standardized, with capacity ranging from 60 A to 600 A and height ranging from 1U to 5U. Modular design enables easy installation and expansion, supporting standard 19-inch rack or cabinet installation. In addition, the Embedded Power & Module adapts to a wide range of AC input voltage, supporting accurate battery and remote management functions.



Parameters ETP Power
Dimensions (H x W x D)
(1U to 5U) x 482.6 mm x 330 mm
Weight 4 kg to 30 kg
Installation Mode 19-inch rack or cabinet
Protection Rating IP20
Input Mode 85 V to 300 V AC: Three-phase, compatible with single-phase
110 V AC dual-live wire: 90/180 V to 145/290 V AC
220 V single-phase: 85 V to 300 V AC
Maximum Capacity 4 kW to 36 kW
Operating Temperature –40ºC to 65ºC. At 50ºC to 65ºC, the load needs to be reduced to 80%; at –40ºC to –33ºC, the system can start without damage.
Storage/Transport Temperature –40ºC to 70ºC
Operating Humidity 5% to 95% (non-condensing)
Altitude 0 m to 4000 m (at altitudes ranging from 3000 m to 4000 m, operating temperature decreases by 1ºC for each additional 200 m)
Cooling Mode Power distribution natural cooling, module forced air cooling

Partnereink számára

Amennyiben már partnerünk, kérjük kattintson ide annak érdekében, hogy több marketing anyag váljon elérhetővé az Ön számára.
Kattintson ide amennyiben a Partner Zóna meglátogatása, a tudakozódási státusz ellenőrzése, a rendelések menedzselése, segítség igénylése vagy a Huawei Partnerekről való több információ elérése az igénye.