Huawei PowerCube500-T873E
A passive optical network power solution for video sites.
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Enterprise products, solutions & services
Huawei PowerCube500-T873E
Simple Deployment
High Reliability
Intelligent Management
Specifications
Parameters | System Parameter Type |
Dimensions (H x W x D) | 570 x 300 × 150 mm |
Weight | < 18 kg |
Heat Dissipation Mode | Natural heat dissipation |
Installation Mode | Pole-mounted installation or wall-mounted installation |
Pole Diameter Range | 105–210 mm |
Outgoing Mode | Down-line, back-line |
Noise Level | ≤ 65 dB (A) at 1.5 m, GR487 compliant |
Degree of Protection | IP55 |
Operating Ambient Temperature Range | –40 ºC to +55 ºC |
Storage Temperature Range | –40 ºC to +70 ºC |
Operating Humidity Range | 5–95% (non-condensing) |
Altitude | 0–5000 m (the maximum operating temperature decreases by 1°C for each 200 m elevation from 2000 m to 5000 m) |
Salt Spray Prevention | Supports salt spray prevention in the environment where the distance is greater than 500 m |
Parameters | Power Parameter Type |
Mains Input Mode | 220 V AC single phase |
Mains Input Voltage | 85–290 V AC, Rated: 220 V AC |
Input Frequency | 45–66 Hz |
Maximum Input Current | 4A (450 W) |
Solar Input Voltage | 36–120 V DC |
MPPT Tracing Precision | ≥ 98% |
Maximum Input Power of Solar Energy | 1400 W |
Output Voltage | 2 x 12 V DC (total power ≤ 72 W) 2 x 24 V AC (total power ≤ 100 W) PoE/PoE+/PoE++ (48 V DC) (estimated total PoE output power ≤ 170 W) |
Rated Output Power | 200 W (12 V DC + 24 V AC + 6 x PoE total power ≤ 200 W) |
Input Surge Protection | AC: 20/ kA / 20 kA (8 / 20 µs); 6/kV / 6kV (1.2 / 50µs) |
Output Surge Protection | DC: 12 V power output: 2/4 kV (8/20 μs) 3/5kA (8/20μs) AC: 24 V power output: 2/6 kV (insulated) |
Parameters | Network Parameter Type |
1 x BOB + 1 x SFP | 1 x GPON/XGS-PON/2 x GPON |
Interface Type (GPON) | SC/UPC |
Compliance Standards (GPON) | ITU-T G.984.2, Class B+ |
Receiver Sensitivity (GPON) | (GPON) –27 dBm to –29 dBm |
Overload Optical Power (GPON) | –8dBm |
Transfer Rate (GPON) | Downstream rate: 2.488 Gbit/s; Upstream rate: 1.244 Gbit/s |
Networking Protection (GPON) | (GPON) Type B single-homing and Type B dual-homing (supported in Layer 2 forwarding mode) |
Interface Type (XGS-PON) | SC/UPC |
Compliance Standards (XGS-PON) | ITU-T G.9807, Class N1/N2 |
Receiver Sensitivity (XGS-PON) | –28 dBm |
Overload Optical Power (XGS-PON) | –9 dBm |
Transfer Rate (XGS-PON) | Downlink Rate: 9.953 Gbit/s Uplink Rate: 9.953 Gbit/s |
Networking Protection (XGS-PON) | Type B single-homing and Type B dual-homing (supported in Layer 2 forwarding mode) |
Type and Quantity | 8 GE (2 x GE PoE++, 2 x GE, and 4 x GE PoE+) + 1 x DI + 1 x DO |
PoE Compliance Standards | IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt |
POE Power | The maximum output power is 170 W. GE ports 1 and 2 support a maximum of 60 W (supporting PoE++). GE ports 3 and 4 do not support PoE. GE ports 5 to 8 support a maximum of 30 W (supporting PoE+). |
Interface Type | RJ-45 |
Interface Rate | 10/100/1000 Mbit/s auto-sensing |
DI | Connect door magnet and infrared sensor (+, –) |
DO | Connect external alarm devices (+, –) |