AP2030DN Series Access Point Details Page

AP2030DN Series Access Point Data Sheet

Product appearance

Appearance

AP2030DN general view

Interfaces

AP2030DN interface locator

  1. ETH0 to 3: 10M/100M port connects to the wired Ethernet
  2. Phone: Phone port used to connect to the phone or ADSL device through phone lines
  3. GE/PoE: 10M/100M/1,000M port used to connect to the wired Ethernet. The port can also connect to a PoE power supply
  4. Phone: Phone port connects to the server through phone lines
  5. Default: Hold down the button more than 3 seconds to reset factory settings 
  6. Power input interface: 12V DC

LED indicators

Type Color Status Description
Default Status after Power-on Green Steady on AP is just powered on and the software is not started yet
Software Startup Status Green Blinks once, then stead on After the system is reset and starts uploading the software, the indicator blinks green once. Remains stead green until the software is uploaded and started
Running Status Green Blinks once every 2 seconds (0.5 Hz)
  • System is operating properly, the Ethernet connection is normal, and STAs are associated with the AP
  • The system enters the Uboot CLI
Blinks once every 5 seconds (0.2 Hz) The system is running properly, the Ethernet connection is normal, and no STA is associated with the AP. The system is in low power consumption state.
Alarm Green Blinks once every 0.25 seconds (4 Hz)
  • Software is being uploaded
  • After the software is uploaded and started, the AP, working in Fit AP mode, requests to go online from the AC and maintains this state until it goes online successfully before the CAPWAP link is established
  • The AP working in Fit AP mode fails to go online on the AC (the CAPWAP link disconnects)
Fault Red Steady on A fault that affects services, such as a DRAM detection failure or system software loading failure has occurred. The fault must be fixed manually because it cannot be fixed automatically

Product characteristics

WLAN

Network

Quality of Service (QoS)

Security

Maintenance

BYOD

Spectrum analysis

Product specifications

Basic

Item Description
Technical Dimensions (H x W x D) 1.6 in. x 3.3 in. x 5.5 in. (41.5 mm x 86 mm x 140 mm)
Weight 0.5 lb. (0.23 kg)
System memory
  • 128 MB DDR2
  • 32 MB Flash
Power Power input
  • DC: 12 ±10%
  • PoE: in compliance with IEEE 802.3af/at
Maximum power consumption

8.7W

Note: Actual maximum power consumption depends on local laws and regulations
Environment Operating temperature and altitude
  • 32oF to 104oF (0oC to 40oC)
  • -196.8 ft. to 16,404.1 ft. (-60m to 5,000m)
Storage temperature -40oF to 158oF (-40oC to 70oC)
Operating humidity 5% to 95% (Non-condensing)
Ingress protection rating IP20
Atmospheric pressure 20.6 inHg to 31.3 inHg (70 kPa to 106 kPa)

Radio

Item Description
Antenna Type

Built-in

Antenna Gain
  • 2.4 GHz: 2 dBi
  • 5 GHz: 3 dBi
Maximum Number of Users ≤ 64
Maximum Transmit Power
  • 2.4 GHz: 21 dBm (Combined power)
  • 5 GHz: 20 dBm (Combined power)
Note: You can adjust the transmit power from maximum transmit power to 21 dBm, 1 dB at a time. Actual transmit power depends on local laws and regulations. The AP2030DN uses a 86-type box and applies only to countries and regions that support 86-type boxes
Maximum Number of Non-overlapping Channels

2.4 GHz

  • 802.11b/g

     -20 MHz: 3
  • 802.11n

     -20 MHz: 3

     -40 MHz: 1

5 GHz

  • 802.11a

     -20 MHz: 24
  • 802.11n

     -20 MHz: 24

     -40 MHz: 11
  • 802.11ac

     -20 MHz: 24

     -40 MHz: 11

     -40 MHz: 5
Note: The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Code and Channels compliance status
Channel Rates
  • 802.11b: 1, 2, 5.5, and 11 Mbit/s
  • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
  • 802.11n: 6.5 to 300 Mbit/s
  • 802.11ac: 6.5 to 867 Mbit/s
Receiver Sensitivity

2.4 GHz

802.11b (CCK)

  • -101 dBm @ 1 Mbit/s
  • -96 dBm @ 2 Mbit/s
  • -94 dBm @ 5.5 Mbit/s
  • -90 dBm @ 11 Mbit/s

2.4 GHz

802.11g (Non-HT20)

  • -95 dBm @ 6 Mbit/s
  • -95 dBm @ 9 Mbit/s
  • -94 dBm @ 12 Mbit/s
  • -92 dBm @ 18 Mbit/s
  • -88 dBm @ 24 Mbit/s
  • -85 dBm @ 36 Mbit/s
  • -81 dBm @ 48 Mbit/s
  • -79 dBm @ 54 Mbit/s

2.4 GHz

802.11n (HT20)

  • -95 dBm @ MCS0
  • -94 dBm @ MCS1
  • -92 dBm @ MCS2
  • -87 dBm @ MCS3
  • -84 dBm @ MCS4
  • -79 dBm @ MCS5
  • -78 dBm @ MCS6
  • -77 dBm @ MCS7
  • -93 dBm @ MCS8
  • -92 dBm @ MCS9
  • -90 dBm @ MCS10
  • -85 dBm @ MCS11
  • -82 dBm @ MCS12
  • -77 dBm @ MCS13
  • -76 dBm @ MCS14
  • -75 dBm @ MCS15

2.4 GHz

802.11n (HT40)

  • -93 dBm @ MCS0
  • -91 dBm @ MCS1
  • -89 dBm @ MCS2
  • -84 dBm @ MCS3
  • -81 dBm @ MCS4
  • -77 dBm @ MCS5
  • -75 dBm @ MCS6
  • -74 dBm @ MCS7
  • -91 dBm @ MCS8
  • -89 dBm @ MCS9
  • -87 dBm @ MCS10
  • -82 dBm @ MCS11
  • -79 dBm @ MCS12
  • -75 dBm @ MCS13
  • -73 dBm @ MCS14
  • -72 dBm @ MCS15

5 GHz

802.11a (Non-HT20)

  • -94 dBm @ 6 Mbit/s
  • -94 dBm @ 9 Mbit/s
  • -93 dBm @ 12 Mbit/s
  • -91 dBm @ 18 Mbit/s
  • -87 dBm @ 24 Mbit/s
  • -84 dBm @ 36 Mbit/s
  • -79 dBm @ 48 Mbit/s
  • -78 dBm @ 54 Mbit/s

5 GHz

802.11n (HT20)

  • -94 dBm @ MCS0
  • -93 dBm @ MCS1
  • -90 dBm @ MCS2
  • -86 dBm @ MCS3
  • -83 dBm @ MCS4
  • -78 dBm @ MCS5
  • -77 dBm @ MCS6
  • -76 dBm @ MCS7
  • -92 dBm @ MCS8
  • -91 dBm @ MCS9
  • -88 dBm @ MCS10
  • -84 dBm @ MCS11
  • -81 dBm @ MCS12
  • -76 dBm @ MCS13
  • -75 dBm @ MCS14
  • -74 dBm @ MCS15

5 GHz

802.11n (HT40)

  • -91 dBm @ MCS0
  • -90 dBm @ MCS1
  • -87 dBm @ MCS2
  • -83 dBm @ MCS3
  • -80 dBm @ MCS4
  • -76 dBm @ MCS5
  • -74 dBm @ MCS6
  • -73 dBm @ MCS7
  • -89 dBm @ MCS8
  • -88 dBm @ MCS9
  • -85 dBm @ MCS10
  • -81 dBm @ MCS11
  • -78 dBm @ MCS12
  • -74 dBm @ MCS13
  • -72 dBm @ MCS14
  • -71 dBm @ MCS15

5 GHz

802.11ac (VTH20)

  • -95 dBm @ MCS0NSS1
  • -93 dBm @ MCS1NSS1
  • -90 dBm @ MCS2NSS1
  • -86 dBm @ MCS3NSS1
  • -83 dBm @ MCS4NSS1
  • -78 dBm @ MCS5NSS1
  • -77 dBm @ MCS6NSS1
  • -75 dBm @ MCS7NSS1
  • -71 dBm @ MCS8NSS1
  • -93 dBm @ MCS0NSS2
  • -91 dBm @ MCS1NSS2
  • -88 dBm @ MCS2NSS2
  • -84 dBm @ MCS3NSS2
  • -81 dBm @ MCS4NSS2
  • -76 dBm @ MCS5NSS2
  • -75 dBm @ MCS6NSS2
  • -73 dBm @ MCS7NSS2
  • -69 dBm @ MCS8NSS2

5 GHz

802.11ac (VTH40)

  • -91 dBm @ MCS0NSS1
  • -90 dBm @ MCS1NSS1
  • -88 dBm @ MCS2NSS1
  • -83 dBm @ MCS3NSS1
  • -80 dBm @ MCS4NSS1
  • -76 dBm @ MCS5NSS1
  • -74 dBm @ MCS6NSS1
  • -72 dBm @ MCS7NSS1
  • -68 dBm @ MCS8NSS1
  • -66 dBm @ MCS9NSS1
  • -89 dBm @ MCS0NSS2
  • -88 dBm @ MCS1NSS2
  • -86 dBm @ MCS2NSS2
  • -81 dBm @ MCS3NSS2
  • -78 dBm @ MCS4NSS2
  • -74 dBm @ MCS5NSS2
  • -72 dBm @ MCS6NSS2
  • -70 dBm @ MCS7NSS2
  • -65 dBm @ MCS8NSS2
  • -63 dBm @ MCS9NSS2

5 GHz

802.11ac (VTH80)

  • -88 dBm @ MCS0NSS1
  • -87 dBm @ MCS1NSS1
  • -84 dBm @ MCS2NSS1
  • -80 dBm @ MCS3NSS1
  • -77 dBm @ MCS4NSS1
  • -73 dBm @ MCS5NSS1
  • -71 dBm @ MCS6NSS1
  • -69 dBm @ MCS7NSS1
  • -65 dBm @ MCS8NSS1
  • -63 dBm @ MCS9NSS1
  • -86 dBm @ MCS0NSS2
  • -85 dBm @ MCS1NSS2
  • -82 dBm @ MCS2NSS2
  • -78 dBm @ MCS3NSS2
  • -75 dBm @ MCS4NSS2
  • -71 dBm @ MCS5NSS2
  • -69 dBm @ MCS6NSS2
  • -67 dBm @ MCS7NSS2
  • -62 dBm @ MCS8NSS2
  • -60 dBm @ MCS9NSS2

Networking and applications

The Huawei AP2030DN is a wall plate access point that uses a 3.3 in. x 3.3 in. (86 mm x 86 mm) plate design and can be easily installed in an 86-type box. It has built-in antennas, a hidden indicator, and a sliding panel. The AP2030DN provides comprehensive service support capabilities and features:

  • High security
  • Simple network deployment

  • Automatic AC discovery and configuration

  • Real-time management and maintenance

The AP2030DN can connect to wireless terminals through wireless connections or to wired terminals using wired cables. This makes it the ideal choice of customers building indoor distributed networks.

Typical Fit AP networking

Fit AP networking scenario

The AC is responsible for:

  • User access
  • AP go-online

  • AP management

  • Authentication

  • Routing

  • Security

  • QoS