The Huawei U1911 Unified Gateway is a core voice gateway used in the Huawei Enterprise Communications (EC) Solution. It works with Huawei IP terminals and UC applications to provide professional IP telephony (IPT) and UC services.
The lightweight U1911 uses a highly-integrated broadband and narrowband design for hybrid analog and IP phone networking. It can connect to the Public Switched Telephone Network (PSTN) or to voice switches in private networks using digital, analog, and broadband Simple Internet Protocol (SIP) trunks.
The U1911 is equipped with modular boards to simplify installation and support hot swapping. It can be quickly deployed and easily maintained with graphical configuration tools.
Highly integrated, impressive functionality
- Extensive IPT services
- Built-in high-fidelity audio conferencing with multiple conferencing modes
- One-Number-Link-You (ONLY) allows users to answer incoming calls from anywhere, at any time, the way they prefer
- Built-in voicemail so users never miss important calls
- UC application extension
Effective cost control
- Number analysis and whitelist/blacklist
- 32-level customized call rights
- Password-based call barring
- Intelligent routing to save on communications
Easy to deploy and maintain
- GUI-based deployment tools for easy, quick installation
- Unified network management system to improve management and maintenance efficiency
- Built-in web management system for convenient operations
Networking and applications
U1911 is a small-capacity voice gateway for small- and medium-sized voice communication scenarios where enterprises have no branches or small branches. Integrated Access Devices (IAD) or IP phones can be deployed in small branches.
IPT application scenarios
U1911 can connect to the carrier network through a broadband/narrowband trunk to provide a variety of voice functions. In this case, SIP phones can be connected directly. Analog phones and fax machines can be connected directly or through IADs.
UC application scenarios
Enhanced communication suites can be deployed at the same time to enrich communication channels and improve communication efficiency with a wide range of UC services. Services include presence, Instant Messaging (IM), and multimedia conferencing.
|User Capacity per U1911
||100 (maximum of 100 SIP users or 64 FXS ports for analog users)
||Analog, IP, and video phones and soft clients
||Maximum of 24 FXO ports, 12E1/T1 ports, or 8 BRI ports
||SS7, R2, PRI, QSIG, SIP, and BRI
||G.711a/μ, G.729, G.729a, G.729b, G.729ab, iLBC, G.722, G.722.1, and G.722.2
||Maximum of 60 conference participants which can be allocated to 20 conference halls (each hall can support up to 60 participants)
|Built-in Voicemail Box
- Maximum of 12 built-in, concurrent voicemail channels
- Built-in 16G SD storage card
||AC: 100V to 240V, 50 Hz/60 Hz
DC: -38.4V to -60V (typical value: -48V)
|150W fully configured
|Dimensions (H x W x D)
||Standard 19-inch 1U subrack
1.7 in. x 17.4 in. x 12.2 in. (44 mm x 442 mm x 310 mm)
||3.6 lb. (8 kg) fully configured
||Storage temperature: -40oF to 158oF (-40oC to 70oC)
Long-term operating temperature: 32oF to 113oF (0oC to 45oC)
Short-term operating temperature: 23oF to 131oF (-5oC to 55oC)
||5% to 95% without condensation
||Less than 180 mg/m³ airborne dust (deploy air-filtration systems in the operating environment)
||Centralized/remote equipment management, signal tracing, resource management, alarm management, and quick deployment