OptiXstar P883H
XGS-PON Pro PoE ONU
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>
Enterprise products, solutions & services
XGS-PON Pro PoE ONU
OptiXstar P883H
Huawei OptiXstar P883H is an ONU designed for enterprise, education, and healthcare scenarios. It provides two XGS-PON Pro ports on the network side and eight 2.5G Ethernet ports. These ports provide high-quality voice, data, and HD video services.
Ultra wide access
• XGS-PON Pro，Transmission rate: 12.4416 Gbit/s
• 2.5GE port, PoE+, Wi-Fi 7 AP access.
High Reliability，High Security
• Type B/Type C service protection
• 802.1x authentication、 Firewall、DoS/ARP anti-attacks and other security features
Easy O&M
• Centralized management on eSight
• Automatic service configuration
Specifications
| Parameters | OptiXstar P883H |
| Dimensions (W x D x H) | 250mm x 180mm x 43.6mm |
| Network-side ports | 2 x XGS-PON Pro (BOB+SFP), compatible with XGS-PON |
| User-side ports | 8 x 2.5GE(PoE+) |
| Rated power supply | 54V/56V |
| PoE output power | • Maximum total power: 120 W • Maximum power per port: 30 W |
| Static power consumption | 12 W |
| Maximum power consumption | 23 W (without PoE) 145 W (120 W over PoE) |
| Operating temperature | -5°C to 45°C |
| Operating humidity | 5%–95% RH, non-condensing |
| Weight (excluding adapter) | 1.66 kg |
| Surge protection specifications | GE: 4 kV in common mode AC power (power adapter): 6 kV in common mode and 6 kV in differential mode |
| Heat dissipation | Natural cooling |
| Installation mode | Placed horizontally on a desktop, wall-mounting, or installed in a 19-inch cabinet or network box |
| PON port | • Port mode: XGS-PON Pro, Compatible with XGS-PON • Port type: SC/UPC • Maximum transmission distance: 20 km • Class B1 • Transmission rate: RX 12.4416 Gbit/s, TX 12.4416 Gbit/s • Optical receiver sensitivity: –22 dBm; Overload optical power: –7 dBm |
| SFP port | • Port mode: XGS-PON Pro, Compatible with XGS-PON • Port type: SC/UPC • Optical module type: SFP • Maximum transmission distance: 20 km • Class C+ (SFP) • Transmission rate: RX 12.4416 Gbit/s, TX 12.4416 Gbit/s • Optical receiver sensitivity: –27 dBm; Overload optical power: –7 dBm |
| 2.5GE ports | • RJ-45 port • Standards compliance: IEEE802.3 • 10/100/1000/2500 Mbit/s auto-sensing • Half duplex/full duplex auto-negotiation and configuration • VLAN tag/tag removal, VLAN transparent transmission, and VLAN filtering based onEthernet ports • Support PoE+/PoE |
| Security | • MAC authentication, 802.1x authentication, MAB authentication, and dynamic delivery of user policies (VLAN and ACL) • Dos/ARP anti-attacks • MAC address and IP address binding • Device access control |
| Multicast | • IGMP v2/v3 snooping • IGMP proxy • MLDv1/MLDv2 snooping • Dynamic controllable multicast • Uncontrollable multicast |
| QoS | • Ethernet port rate limitation • 802.1p priority • SP/WRR/SP+WRR |
| Networking protection | • Type B single-homing protection • Type B dual-homing protection • Type C single-homing protection • Type C dual-homing protection • PON upstream load sharing |
Copyright © 2025 Huawei Technologies Co., Ltd. All rights reserved.
