Radio Frequency (RF) Coaxial Connectors
RF coaxial connectors enable you to extend or customize the length of RF connecting lines on site, saving you time and expense in your WLAN construction. The connectors can be used with Huawei AP6510DN/AP6610DN/AP6310SN access points.
For example, if 7m connecting lines are required, you can use an RF coaxial connector to connect a 2m and a 5m RF connecting line. Each coaxial cable must be configured with two RF coaxial connectors; models are based on the site survey. For details about the model selection, contact Huawei network planning engineers.
Extend or customize RF coaxial cables on site with Huawei RF coaxial connectors
- Extend or customize the length of RF connecting lines on-site, and save time and expense in constructing your WLAN
- An RF coaxial connector can connect two coaxial cables, a coaxial cable and a microstrip, and a coaxial cable and a waveguide antenna
- A plug is installed on the cable terminal, and a socket on the device
Specifications
|
Model |
A0RFCON04 |
GM-ANT FED-1/2 |
|
Type |
N |
N |
|
Impedance |
50 ohm |
50 ohm |
|
Structure |
Straight |
Straight |
|
Connection Properties |
Female |
Male |
|
Installation Form |
With a cable connected to a Type N connector |
With a 1/2 inch feeder |
|
Standing-Wave Ratio |
≤ 1.3 |
≤ 1.15 |