AP5030DN-C Product Description

AP5030DN-C Product Description

Product appearance

Appearance

AP5030DN-C

Port

AP5030DN-C

1. Input port for 12V DC power supply

2. Default button: Restores factory settings if you hold down the button for more than 3 seconds

3. GE1: 10M/100M/1,000M port used to connect to the wired Ethernet

4. GE0/PoE: 10M/100M/1,000M port used to connect to the wired Ethernet. The port can connect to a PoE power supply to provide power for APs

5. Console port: Connects to the maintenance terminal for AP configuration and management

6. Lock port: Protects the AP against theft

LED Indicators

Note: Indicator colors may vary slightly at different temperature.

Type Color Status Description
Default Status after Power-on Green Steady on The AP is just powered on and the software is not started yet.
Software Startup Status Green Steady on after blinking once After the system is reset and starts loading the software, the indicator blinks green once. Until the software is loaded and started, the indicator remains steady green.
Running Status Yellow Blinking once every 2 seconds (0.5 Hz)
  • The system is running properly, the Ethernet connection is normal, and STAs are associated with the AP
  • The system enters the Uboot CLI
Blinking once every 5 seconds (0.2 Hz) The system is running properly, the Ethernet connection is normal, and no STA is associated with the AP. The system is in low power consumption state.
Alarm Yellow Blinking once every 0.25 seconds (4 Hz)
  • The software is being upgraded
  • After the software is loaded and started, the AP requests to go online if it works in cloud-based management mode. The indicator remains in this state before the AP successfully goes online (CAPWAP link setup)
  • The AP works in cloud-based management mode and fails to go online (CAPWAP link disconnection)
Fault Red Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.

Product characteristics

WLAN features

  • Compliance with IEEE 802.11a/b/g/n/ac
  • Maximum rate of 1.75 Gbit/s
  • Maximum Ratio Combining (MRC)
  • Space Time Block Code (STBC)
  • Beamforming
  • Low-Density Parity-Check (LDPC)
  • Maximum-Likelihood Detection (MLD)
  • Frame aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx only)
  • 802.11 Dynamic Frequency Selection (DFS)
  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • Automatic and manual rate adjustment
  • WLAN channel management and channel rate adjustment (Note: For details about WLAN channel management, see the Country Code & Channel Compliance Table)
  • Service Set Identifier (SSID) hiding
  • Signal Sustain Technology (SST)
  • Unscheduled Automatic Power Save Delivery (U-APSD)
  • Automatic login
  • Cloud-based management

Network features

  • Compliance with IEEE 802.3ab
  • Auto-negotiation of the rate and duplex mode and automatic switchover between the Media Dependent Interface (MDI) and Media Dependent Interface Crossover (MDI-X)
  • Compliance with IEEE 802.1q
  • SSID-based VLAN assignment
  • DHCP client, obtaining IP addresses through DHCP
  • STA isolation in the same VLAN
  • Access Control Lists (ACLs)
  • Link Layer Discovery Protocol (LLDP)
  • Unified authentication on the Agile Controller-Cloud Manager
  • Network Address Translation (NAT)

QoS features

  • Priority mapping and packet scheduling based on a Wi-Fi Multimedia (WMM) profile to implement priority-based data processing and forwarding
  • WMM parameter management for each radio frequency
  • WMM power saving
  • Priority mapping for upstream packets and flow-based mapping for downstream packets
  • Queue mapping and scheduling
  • User-based bandwidth limiting
  • Airtime scheduling

Security features

  • Open system authentication
  • WEP authentication/encryption using a 64-bit, 128-bit, or 152-bit encryption key
  • WPA/WPA2-PSK authentication and encryption (WPA/WPA2 personal edition)
  • WPA/WPA2-802.1x authentication and encryption (WPA/WPA2 enterprise edition)
  • WPA-WPA2 hybrid authentication
  • 802.1x authentication, MAC address authentication, and Portal authentication
  • DHCP snooping
  • Dynamic ARP Inspection (DAI)
  • IP Source Guard (IPSG)

Maintenance features

  • Unified management and maintenance on the Agile Controller-Cloud Manager
  • Plug-and-Play (PnP): Automatically goes online and loads configurations
  • Batch upgrade
  • Telnet
  • STelnet using SSH v2
  • SFTP using SSH v2
  • Real-time configuration monitoring and fast fault location using the NMS
  • System status alarm
  • Network Time Protocol (NTP)

Product specifications

Basic Specifications

Item Description
Physical Specifications Dimensions (H x W x D) 53 mm x 220 mm x 220 mm
Weight 0.8 kg
Power Specifications Power input
  • DC: 12V ±10%
  • PoE power supply: In compliance with IEEE 802.3af/at
Maximum power consumption

12.95W

Note: The actual maximum power consumption depends on local laws and regulations

Environment Specifications Operating temperature -10°C to 50°C

Storage temperature -40°C to 70°C

Operating humidity 5% to 95% (non-condensing)
IP rating IP41
Atmospheric pressure 53 Kpa to 106 Kpa

Radio Specifications

Item Description
Antenna Type Built-in antenna
Antenna Gain
  • 2.4 GHz: 4 dBi
  • 5 GHz: 5 dBi
Maximum Number of Users ≤ 256
Maximum Number of VAPs for Each Radio Frequency 16
Maximum Transmit Power
  • 2.4 GHz: 25 dBm (combined power)
  • 5 GHz: 25 dBm (combined power)

Notes: The 2.4 GHz radio frequency does not support the 40M bandwidth in FCC regions (including America). The actual transmit power depends on local laws and regulations. You can adjust the transmit power from the maximum transmit power to 1 dBm, in steps of 1 dB.

Maximum Number of Non-overlapping Channels 2.4 GHz

  • 802.11b/g
      • 20 MHz: 3
  • 802.11n
      • 20 MHz: 3
      • 40 MHz: 1
5 GHz

  • 802.11a
      • 20 MHz: 13
  • 802.11n
      • 20 MHz: 13
      • 40 MHz: 6
  • 802.11ac
      • 20 MHz: 13
      • 40 MHz: 6
      • 80 MHz: 3
Note: The table uses the number of non-overlapping channels supported by China as an example. The number of non-overlapping channels varies in different countries. For details, see the Country Codes & Channels Compliance.

Note: If the AP is delivered to the USA, pay attention to the following on channel and frequency band usage:
  • The country code of the AP is fixed
  • High power radars working at frequencies in the range of 5.25 GHz to 5.35 GHz, 5.47 GHz to 5.6 GHz, and 5.65 GHz to 5.725 GHz can interfere with or even damage APs working at the same frequency
Channel Rates
  • 802.11b: 1, 2, 5.5, and 11 Mbit/s
  • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbit/s
  • 802.11n: 6.5 Mbit/s to 450 Mbit/s
  • 802.11ac: 6.5 Mbit/s to 1,300 Mbit/s
Receiver Sensitivity (typical values) 2.4 GHz

802.11b
  • -101 dBm @ 1 Mbit/s
  • -96 dBm @ 2 Mbit/s
  • -93 dBm @ 5.5 Mbit/s
  • -91 dBm @ 11 Mbit/s
2.4 GHz

802.11g
  • -92 dBm @ 6 Mbit/s
  • -91 dBm @ 9 Mbit/s
  • -91 dBm @ 12 Mbit/s
  • -90 dBm @ 18 Mbit/s
  • -89 dBm @ 24 Mbit/s
  • -85 dBm @ 36 Mbit/s
  • -82 dBm @ 48 Mbit/s
  • -81 dBm @ 54 Mbit/s
2.4 GHz

802.11n (HT20)
  • -92 dBm @ MCS0
  • -92 dBm @ MCS1
  • -92 dBm @ MCS2
  • -87 dBm @ MCS3
  • -85 dBm @ MCS4
  • -81 dBm @ MCS5
  • -79 dBm @ MCS6
  • -77 dBm @ MCS7
  • -90 dBm @ MCS8
  • -90 dBm @ MCS9
  • -90 dBm @ MCS10
  • -85 dBm @ MCS11
  • -83 dBm @ MCS12
  • -79 dBm @ MCS13
  • -77 dBm @ MCS14
  • -75 dBm @ MCS15
  • -88 dBm @ MCS16
  • -88 dBm @ MCS17
  • -88 dBm @ MCS18
  • -83 dBm @ MCS19
  • -81 dBm @ MCS20
  • -77 dBm @ MCS21
  • -75 dBm @ MCS22
  • -73 dBm @ MCS23
2.4 GHz

802.11n (HT40)
  • -90 dBm @ MCS0
  • -90 dBm @ MCS1
  • -89 dBm @ MCS2
  • -85 dBm @ MCS3
  • -82 dBm @ MCS4
  • -78 dBm @ MCS5
  • -76 dBm @ MCS6
  • -75 dBm @ MCS7
  • -88 dBm @ MCS8
  • -88 dBm @ MCS9
  • -87 dBm @ MCS10
  • -83 dBm @ MCS11
  • -80 dBm @ MCS12
  • -76 dBm @ MCS13
  • -74 dBm @ MCS14
  • -73 dBm @ MCS15
  • -86 dBm @ MCS16
  • -86 dBm @ MCS17
  • -85 dBm @ MCS18
  • -81 dBm @ MCS19
  • -78 dBm @ MCS20
  • -74 dBm @ MCS21
  • -72 dBm @ MCS22
  • -71 dBm @ MCS23
5 GHz

802.11a (non-HT20)
  • -94 dBm @ 6 Mbit/s
  • -93 dBm @ 9 Mbit/s
  • -93 dBm @ 12 Mbit/s
  • -92 dBm @ 18 Mbit/s
  • -88 dBm @ 24 Mbit/s
  • -85 dBm @ 36 Mbit/s
  • -81 dBm @ 48 Mbit/s
  • -79 dBm @ 54 Mbit/s
5 GHz

802.11n (HT20)
  • -93 dBm @ MCS0
  • -93 dBm @ MCS1
  • -91 dBm @ MCS2
  • -86 dBm @ MCS3
  • -83 dBm @ MCS4
  • -78 dBm @ MCS5
  • -77 dBm @ MCS6
  • -76 dBm @ MCS7
  • -91 dBm @ MCS8
  • -91 dBm @ MCS9
  • -89 dBm @ MCS10
  • -84 dBm @ MCS11
  • -81 dBm @ MCS12
  • -76 dBm @ MCS13
  • -75 dBm @ MCS14
  • -74 dBm @ MCS15
  • -89 dBm @ MCS16
  • -89 dBm @ MCS17
  • -87 dBm @ MCS18
  • -82 dBm @ MCS19
  • -79 dBm @ MCS20
  • -74 dBm @ MCS21
  • -73 dBm @ MCS22
  • -72 dBm @ MCS23
5 GHz

802.11n (HT40)
  • -91 dBm @ MCS0
  • -91 dBm @ MCS1
  • -88 dBm @ MCS2
  • -83 dBm @ MCS3
  • -81 dBm @ MCS4
  • -76 dBm @ MCS5
  • -75 dBm @ MCS6
  • -74 dBm @ MCS7
  • -89 dBm @ MCS8
  • -89 dBm @ MCS9
  • -86 dBm @ MCS10
  • -81 dBm @ MCS11
  • -79 dBm @ MCS12
  • -74 dBm @ MCS13
  • -73 dBm @ MCS14
  • -72 dBm @ MCS15
  • -87 dBm @ MCS16
  • -87 dBm @ MCS17
  • -84 dBm @ MCS18
  • -79 dBm @ MCS19
  • -77 dBm @ MCS20
  • -72 dBm @ MCS21
  • -71 dBm @ MCS22
  • -70 dBm @ MCS23
-
5 GHz

802.11ac (VHT20)
  • -93 dBm @ MCS0NSS1
  • -93 dBm @ MCS1NSS1
  • -91 dBm @ MCS2NSS1
  • -86 dBm @ MCS3NSS1
  • -83 dBm @ MCS4NSS1
  • -78 dBm @ MCS5NSS1
  • -77 dBm @ MCS6NSS1
  • -76 dBm @ MCS7NSS1
  • -71 dBm @ MCS8NSS1
  • -91 dBm @ MCS0NSS2
  • -91 dBm @ MCS1NSS2
  • -89 dBm @ MCS2NSS2
  • -84 dBm @ MCS3NSS2
  • -81 dBm @ MCS4NSS2
  • -76 dBm @ MCS5NSS2
  • -75 dBm @ MCS6NSS2
  • -74 dBm @ MCS7NSS2
  • -69 dBm @ MCS8NSS2
  • -89 dBm @ MCS0NSS3
  • -89 dBm @ MCS1NSS3
  • -87 dBm @ MCS2NSS3
  • -82 dBm @ MCS3NSS3
  • -79 dBm @ MCS4NSS3
  • -74 dBm @ MCS5NSS3
  • -73 dBm @ MCS6NSS3
  • -72 dBm @ MCS7NSS3
  • -67 dBm @ MCS8NSS3
  • -65 dBm @ MCS9NSS3
5 GHz

802.11ac (VHT40)
  • -91 dBm @ MCS0NSS1
  • -90 dBm @ MCS1NSS1
  • -88 dBm @ MCS2NSS1
  • -84 dBm @ MCS3NSS1
  • -81 dBm @ MCS4NSS1
  • -77 dBm @ MCS5NSS1
  • -75 dBm @ MCS6NSS1
  • -74 dBm @ MCS7NSS1
  • -69 dBm @ MCS8NSS1
  • -67 dBm @ MCS9NSS1
  • -89 dBm @ MCS0NSS2
  • -88 dBm @ MCS1NSS2
  • -86 dBm @ MCS2NSS2
  • -82 dBm @ MCS3NSS2
  • -79 dBm @ MCS4NSS2
  • -75 dBm @ MCS5NSS2
  • -73 dBm @ MCS6NSS2
  • -72 dBm @ MCS7NSS2
  • -66 dBm @ MCS8NSS2
  • -64 dBm @ MCS9NSS2
  • -87 dBm @ MCS0NSS3
  • -86 dBm @ MCS1NSS3
  • -84 dBm @ MCS2NSS3
  • -80 dBm @ MCS3NSS3
  • -77 dBm @ MCS4NSS3
  • -73 dBm @ MCS5NSS3
  • -71 dBm @ MCS6NSS3
  • -70 dBm @ MCS7NSS3
  • -63 dBm @ MCS8NSS3
  • -61 dBm @ MCS9NSS3
5 GHz

802.11ac (VHT80)
  • -89 dBm @ MCS0NSS1
  • -86 dBm @ MCS1NSS1
  • -85 dBm @ MCS2NSS1
  • -81 dBm @ MCS3NSS1
  • -78 dBm @ MCS4NSS1
  • -74 dBm @ MCS5NSS1
  • -72 dBm @ MCS6NSS1
  • -71 dBm @ MCS7NSS1
  • -67 dBm @ MCS8NSS1
  • -65 dBm @ MCS9NSS1
  • -87 dBm @ MCS0NSS2
  • -84 dBm @ MCS1NSS2
  • -83 dBm @ MCS2NSS2
  • -79 dBm @ MCS3NSS2
  • -76 dBm @ MCS4NSS2
  • -72 dBm @ MCS5NSS2
  • -70 dBm @ MCS6NSS2
  • -69 dBm @ MCS7NSS2
  • -64 dBm @ MCS8NSS2
  • -62 dBm @ MCS9NSS2
  • -85 dBm @ MCS0NSS3
  • -82 dBm @ MCS1NSS3
  • -81 dBm @ MCS2NSS3
  • -77 dBm @ MCS3NSS3
  • -74 dBm @ MCS4NSS3
  • -70 dBm @ MCS5NSS3
  • -67 dBm @ MCS7NSS3
  • -61 dBm @ MCS8NSS3
  • -59 dBm @ MCS9NSS3
-

Networking and applications

Cloud AP networking

AP5030DN-C-Cloud AP networking

In this networking scenario, the device functions as a cloud AP and works with the Agile Controller-Campus on the same cloud for user access, AP management, authentication, routing, security, and QoS. An enterprise can choose to use the Portal authentication server integrated in the Agile Controller-Campus or the authentication server deployed by itself.

For more information, visit http://e.huawei.com/en or contact your local Huawei sales office.